HaloArray.png
Reclaimer - H4.png

EVA-class Mjolnir

From Halopedia, the Halo wiki

Revision as of 11:25, February 2, 2017 by CIA391 (talk | contribs) (→‎GEN2 Information: And thus the entire description for it is kinda.... not useful as it is more talking about the actual GEN1 version and not the GEN2 compatible version....)

Template:Armor Infobox EVA-class Mjolnir (Extra Vehicular Activity), also designated as the MJOLNIR Powered Assault Armor/V variant, is a MJOLNIR armor variant designed by Materials Group. It specialized to improve survivability of Spartans when performing extra-vehicular activity in a vacuum.[1][2]

GEN1 Information

Template:Article Quote

Overview

The EVA variant for the Mark IV still required a T-PACK for maneuvering in zero gravity.[1] The Mark V EVA variant had a shielded visor.[3] The Mark VI EVA variant focuses on increasing exo-atmospheric endurance and improving mobility in zero gravity without the original use of back thrusters.[2] The helmet also contains a single-beam laser TEAMCOM system for communications.[1]

Development history

As early as 2525 developmental Mjolnir permutations utilized physical architecture that would eventually be used for EVA.[4] The MJOLNIR/V variant was developed and tested at a UNSC Low/Zero Gravity Testing Facility facility in Lister, Aigburth on Ganymede, integrating feedback gathered from the Summa Deep Space Incident.[3]

After the first wave of GEN2 systems, based on requests of veteran Spartan-II and Spartan-III operatives, the UNSC Ordnance Commission considered reassessing a refined and upgraded version of the Mark V EVA, specifically the customized suit worn by Emile-A239 complete with the death's head engraving on the visor. This led to the creation of the WRATH-class Mjolnir. In addition, the INDOMITABLE-class Mjolnir's right shoulder pad is based off the Mark V EVA shoulders.[5]

Usage

A user of the Mark V variant of the armor was Emile-A239, who engraved a death's head on the visor.[3]

GEN2 Information

Template:Article Quote

Overview

The GEN2 EVA armor is similar to its GEN1 counterparts in its design. This variant's helmet uses a open-view visor system typical of EVA configurations. It has 59-L20 Aureole braces in the helmet for awareness improvement.[7] The helmet can also be paired with all milspec hardshell and mechanical counterpressure suits.[8]

The slim-contoured chest plate lowers physical profile dramatically. This variant also uses larger pauldrons than previous models.[7]

Development history

Due to their long-standing history of investment Materials Group retained the production rights after the Human-Covenant War. It remains the most effective option for Spartan personnel engaged in exoatmospheric and zero-gravity scenarios. It was tested in WG/Facility 58-32/B5D.[7]

Though EVA-class armor is fully compliant with the strictest UNSC specifications for vacuum-rated environment suits, Material Groups has continued to optimize safety and protective features relevant for combat in the harshest microgravity regimes.[8]

GEN2 compatibility

A GEN1 version of the EVA helmet was made compatible with GEN2 suits.[8]

In-game information

Halo 3

Helmet

Unlock: Unlock Campaign Complete: Normal achievement.

  • Description: The Mjolnir/V variant was developed and tested at UNSC facilities in Lister, Aigburth on Ganymede, integrating feedback gathered from the Summa Deep Space Incident.

The EVA armor's helmet is aesthetically similar to the Semi Powered Infiltration (or SPI) armor's helmet. The visor is smaller than the Mark V variant. However, the rim from the jaw down to the chin is thinner, including the breathers, and the back of the head has a quarter-sphere shape. The helmet is also much more rounded than the SPI helmet. The helmet may have its characteristic visor for complete field of vision during space operations. It vaguely resembles the Security helmet, as they both share a very large visor. Because of this, it has been dubbed the "Fish Bowl" and the "Sniper Magnet" by some gamers due to the prominent, brightly colored, spherical shape of its visor.

Shoulder pauldron

Unlock: Complete The Ark level on Normal, Heroic, or Legendary difficulty.

  • Description: Developed at the UNSC Low/Zero Gravity Testing Facility on Ganymede, the Mjolnir/V variant focuses on increasing exoatmospheric endurance and improving mobility in zero gravity.

The shoulder pauldrons are larger than the standard MJOLNIR plates and feature a long attachment to their center, another similarity to the SPI armor, which could be radios. The pauldrons also cover more surface area than other shoulder pieces.

Chest

Unlock: Complete Tsavo Highway on Normal, Heroic, or Legendary difficulty.

  • Description: In developing the Mjolnir Mark VI Powered Assault Armor/V variant, emphasis was placed on increasing exoatmospheric endurance and improving mobility in zero gravity without the use of thrusters.

The chest plate is a seemingly standard MJOLNIR chest plate set with a small and minor attachment. The attachment consists of a small metal plate connected to a piece of black alloy that has several unknown equipment pieces set into it. It has been speculated that the compartment on the chest plate holds a cable that could be attached to docking ports so that a SPARTAN-II does not drift into space.

Halo: Reach

Helmet

The MJOLNIR V [V] variant was developed and tested at the UNSC facilities in Lister, Aigburth, Ganymede.
Base price: 30,000 cR, Major

  • Description: The EVA helmet was developed using data gathered from the Summa Space Incident.

CNM price: 7000 cR, Major

  • Description: Command network module; standard issue to UNSC Special Forces unit commanders.

UA/HUL[3] price: 15,000 cR, Lt. Colonel

  • Description: Up-armored variant with hardened 3rd generation uplink module for MILINT acquisition.

[C] Base price: 120,000 cR, Commander (EVA base required)

  • Description: The EVA helmet was developed using data gathered from the Summa Space Incident.

[C] CNM price: 25,000 cR, Commander

  • Description: Command network module; standard issue to UNSC Special Forces unit commanders.

[C] UA/HUL[3] price: 140,000 cR, Commander

  • Description: Up-armored variant with hardened 3rd generation uplink module for MILINT acquisition.

The Mk. V variant features a large visor. It bears a striking visual similarity to the SPI helmet. A second EVA helmet, EVA [C], has a skull pattern engraved on the visor. The [C] likely stands for "Custom" or "Carved".

Two upgrades are available for the helmet, the first adds a Command Network Module on the left side (CNM), and the second adds an Up-Armor plate with a Hardened Uplink Module-3rd Generation on the right side (UA/HUL[3]).

Two upgrades are available for the [C] variant of the helmet as well, the first adds a Hardened Uplink Module on the right side (incorrectly called CNM, should be designated HUL), and the second adds an Up-Armor plate with a Hardened Uplink Module on the right side (incorrectly called HUL[3], should be UA/HUL). These errors likely have something to do with the [C] variant's attachments having the same names and descriptions as the standard variant.

Shoulder pauldron

Template:Article Quote Price: 3,000 cR, Corporal

The shoulder pauldrons are large and bulky, several inches thick. The attachments on the sides of the pauldrons found in Halo 3 appear to be built into them, instead of hanging out.

Halo 4

Unlock: Achieve Spartan Rank 27

  • Description: Classic variant of Mjolnir Gen1 designed for extra-vehicular activity operations.

Available skins: BRCH(Breach)

The helmet has a much less curved surface, with a large dip half way down its surface, and a more flared section at the bottom.

Halo 5: Guardians

GEN2

Unlock: Common REQ pack

  • Helmet Description: The EVA helmet can be paired with all milspec hardshell and mechanical counterpressure suits.
  • Body Description: Though EVA-class armor is fully compliant with the strictest UNSC specifications for vacuum-rated environment suits, Material Groups has continued to optimize safety and protective features relevant for combat in the harshest microgravity regimes.

Available skins: Hadfield, Leonov, Solovyev, and Zhigang
Hadfield Unlock: Uncommon REQ pack
Leonov Unlock: Ultra Rare REQ pack
Solovyev Unlock: Rare REQ pack
Zhigang Unlock: Ultra Rare REQ pack

GEN1

Unlock: Ultra Rare REQ pack

  • Helmet Description: Few Mjolnir designs can claim to have spun off as many sub-variants as the EVA [GEN1]. The enduring popularity of the design is a testament to its reliability, ergonomics, modularity, and tradition of craftsmanship by Materials Group.

Trivia

Gallery

Normal Gallery

Halo 5:Guardians armor skins

List of appearances

Sources

  1. ^ a b c Halo: Ghosts of Onyx - Pages 49, 50, 57
  2. ^ a b Halo 3 - Armory description
  3. ^ a b c Cite error: Invalid <ref> tag; no text was provided for refs named EVG
  4. ^ Halo Waypoint: ABOUT THAT FALL OF REACH ANIMATED SERIES TRAILER
  5. ^ Halo Waypoint: Canon Fodder 5/6/2016: Noble Intentions
  6. ^ Amazon.com Mcfarlane Toys - Product description
  7. ^ a b c Cite error: Invalid <ref> tag; no text was provided for refs named H4EVG
  8. ^ a b c Halo 5: Guardians - Armory description Cite error: Invalid <ref> tag; name "H5G" defined multiple times with different content

Template:Mjolnir