EVA-class Mjolnir
From Halopedia, the Halo wiki
Template:Armor Infobox EVA-class Mjolnir (Extra Vehicular Activity), also known as the MJOLNIR Powered Assault Armor/V variant, is a MJOLNIR armor variant produced by the Materials Group. It is designed to improve the survivability of Spartans when performing extra-vehicular activity in the vacuum of space.[1][2]
GEN1 Information
Overview
The EVA variant for the Mark IV still required a T-PACK for maneuvering in zero gravity.[1] The Mark V EVA variant had a shielded visor.[3] The Mark VI EVA variant focuses on increasing exo-atmospheric endurance and improving mobility in zero gravity without the original use of back thrusters.[2] The helmet also contains a single-beam laser TEAMCOM system for communications.[1]
Development history
As early as 2525 developmental Mjolnir permutations utilized physical architecture that would eventually be used for EVA.[4] The MJOLNIR/V variant was developed and tested at a UNSC Low/Zero Gravity Testing Facility facility in Lister, Aigburth on Ganymede, integrating feedback gathered from the Summa Deep Space Incident.[3]
The EVA variant has spawned numerous offshoots and is generally renowned for its reliability, ergonomics, and modularity— features to which the design's enduring popularity is often attributed.[5] After the first wave of GEN2 systems, based on requests of veteran Spartan-II and Spartan-III operatives, the UNSC Ordnance Commission considered reassessing a refined and upgraded version of the Mark V EVA, specifically the customized suit worn by Emile-A239 complete with the death's head engraving on the visor. This led to the creation of the WRATH-class Mjolnir. In addition, the INDOMITABLE-class Mjolnir's right shoulder pad is based off the Mark V EVA shoulders.[6]
Usage
On 2531, Kurt-051 used the Mark IV variant of the armor on a mission alongside Blue Team in Construction Platform 966A.[1] A user of the Mark V variant of the armor was Emile-A239, who engraved a death's head on the visor.[3]
Kelly-087 wearing the Mark IV EVA armor in The Package.[7]
- Mark V EVA.png
Mark V EVA variant.
GEN2 Information
Overview
The GEN2 EVA armor is similar to its GEN1 counterparts in its design. This variant's helmet uses an open-view visor system typical of EVA configurations. It has 59-L20 Aureole braces in the helmet for awareness improvement.[8] The helmet can also be paired with all milspec hardshell and mechanical counterpressure suits.[9]
The slim-contoured chest plate lowers physical profile dramatically. This variant also uses larger pauldrons than previous models.[8]
Development history
Due to their long-standing history of investment Materials Group retained the production rights after the Human-Covenant War. It remains the most effective option for Spartan personnel engaged in exoatmospheric and zero-gravity scenarios. It was tested in WG/Facility 58-32/B5D.[8]
Though EVA-class armor is fully compliant with the strictest UNSC specifications for vacuum-rated environment suits, Material Groups has continued to optimize safety and protective features relevant for combat in the harshest microgravity regimes.[9]
Usage
Spartan Kelly-087 used this armor during Operation: RETRIBUTION on December 2553.[10]
GEN2 compatibility
The GEN1 EVA helmet remains popular as late as 2558 and can still be requisitioned by Spartans for use with their next-generation GEN2 suits.[5]
In-game information
Halo 3
Helmet
Unlock: Unlock Campaign Complete: Normal achievement.
- Description: The Mjolnir/V variant was developed and tested at UNSC facilities in Lister, Aigburth on Ganymede, integrating feedback gathered from the Summa Deep Space Incident.
The EVA armor's helmet is aesthetically similar to the Semi Powered Infiltration (or SPI) armor's helmet. The visor is smaller than the Mark V variant. However, the rim from the jaw down to the chin is thinner, including the breathers, and the back of the head has a quarter-sphere shape. The helmet is also much more rounded than the SPI helmet. The helmet may have its characteristic visor for complete field of vision during space operations. It vaguely resembles the Security helmet, as they both share a very large visor. Because of this, it has been dubbed the "Fish Bowl" and the "Sniper Magnet" by some gamers due to the prominent, brightly colored, spherical shape of its visor.
Shoulder pauldron
Unlock: Complete The Ark level on Normal, Heroic, or Legendary difficulty.
- Description: Developed at the UNSC Low/Zero Gravity Testing Facility on Ganymede, the Mjolnir/V variant focuses on increasing exoatmospheric endurance and improving mobility in zero gravity.
The shoulder pauldrons are larger than the standard MJOLNIR plates and feature a long attachment to their center, another similarity to the SPI armor, which could be radios. The pauldrons also cover more surface area than other shoulder pieces.
Chest
Unlock: Complete Tsavo Highway on Normal, Heroic, or Legendary difficulty.
- Description: In developing the Mjolnir Mark VI Powered Assault Armor/V variant, emphasis was placed on increasing exoatmospheric endurance and improving mobility in zero gravity without the use of thrusters.
The chest plate is a seemingly standard MJOLNIR chest plate set with a small and minor attachment. The attachment consists of a small metal plate connected to a piece of black alloy that has several unknown equipment pieces set into it. It has been speculated that the compartment on the chest plate holds a cable that could be attached to docking ports so that a SPARTAN-II does not drift into space.
Halo: Reach
Helmet
The MJOLNIR V [V] variant was developed and tested at the UNSC facilities in Lister, Aigburth, Ganymede.
Base price: 30,000 cR, Major
- Description: The EVA helmet was developed using data gathered from the Summa Space Incident.
CNM price: 7000 cR, Major
- Description: Command network module; standard issue to UNSC Special Forces unit commanders.
UA/HUL[3] price: 15,000 cR, Lt. Colonel
- Description: Up-armored variant with hardened 3rd generation uplink module for MILINT acquisition.
[C] Base price: 120,000 cR, Commander (EVA base required)
- Description: The EVA helmet was developed using data gathered from the Summa Space Incident.
[C] CNM price: 25,000 cR, Commander
- Description: Command network module; standard issue to UNSC Special Forces unit commanders.
[C] UA/HUL[3] price: 140,000 cR, Commander
- Description: Up-armored variant with hardened 3rd generation uplink module for MILINT acquisition.
The Mk. V variant features a large visor. It bears a striking visual similarity to the SPI helmet. A second EVA helmet, EVA [C], has a skull pattern engraved on the visor. The [C] likely stands for "Custom" or "Carved".
Two upgrades are available for the helmet, the first adds a Command Network Module on the left side (CNM), and the second adds an Up-Armor plate with a Hardened Uplink Module-3rd Generation on the right side (UA/HUL[3]).
Two upgrades are available for the [C] variant of the helmet as well, the first adds a Hardened Uplink Module on the right side (incorrectly called CNM, should be designated HUL), and the second adds an Up-Armor plate with a Hardened Uplink Module on the right side (incorrectly called HUL[3], should be UA/HUL). These errors likely have something to do with the [C] variant's attachments having the same names and descriptions as the standard variant.
Shoulder pauldron
Template:Article Quote Price: 3,000 cR, Corporal
The shoulder pauldrons are large and bulky, several inches thick. The attachments on the sides of the pauldrons found in Halo 3 appear to be built into them, instead of hanging out.
Halo 4
Unlock: Achieve Spartan Rank 27
- Description: Classic variant of Mjolnir Gen1 designed for extra-vehicular activity operations.
Available skins: BRCH(Breach)
- The BRCH skin is obtainable by completing the Hail of Death - Master commendation.
The helmet has a much less curved surface, with a large dip half way down its surface, and a more flared section at the bottom.
Halo 5: Guardians
GEN2
Unlock: Common REQ pack
- Helmet Description: The EVA helmet can be paired with all milspec hardshell and mechanical counterpressure suits.
- Body Description: Though EVA-class armor is fully compliant with the strictest UNSC specifications for vacuum-rated environment suits, Material Groups has continued to optimize safety and protective features relevant for combat in the harshest microgravity regimes.
Available skins: Hadfield, Leonov, Solovyev, and Zhigang
Hadfield Unlock: Uncommon REQ pack
Leonov Unlock: Ultra Rare REQ pack
Solovyev Unlock: Rare REQ pack
Zhigang Unlock: Ultra Rare REQ pack
GEN1
Unlock: Ultra Rare REQ pack
- Helmet Description: Few Mjolnir designs can claim to have spun off as many sub-variants as the EVA [GEN1]. The enduring popularity of the design is a testament to its reliability, ergonomics, modularity, and tradition of craftsmanship by Materials Group.
Trivia
Browse more images in this article's gallery page. |
- The EVA helmet bears a resemblance to the Apollo Program's A7L PGA pressure helmet, which was called a "fish bowl" by the astronauts and support staff.
- Through the Career section of Halo Waypoint, a player that has achieved Milestone 50 (3900 achievement points on all Halo titles) will receive an EVA helmet for their Xbox LIVE avatar.
- The EVA helmet bears a resemblance to the helmet of Guy-Manuel de Homem-Christo, founding member of the French house music duo Daft Punk.
- The four skins for EVA in Halo 5: Guardians are named after astronauts Chris Hadfield, Alexey Leonov, Anatoly Solovyev, and Zhai Zhigang.
Gallery
Normal Gallery
Concept art of the Mark VI EVA armor in Halo 3.
- AP EVA.jpg
Close-up of the Mark VI EVA armor in Halo 3.
- SpartanEVA.jpg
A Spartan-II in full EVA armor in Halo 3.
- 1209687564 EVA.jpg
A Spartan-II clad in full EVA armor in Halo 3.
A Hellspartan action figure wearing Mark VI EVA.
The EVA helmet for the Xbox LIVE Avatar from Halo Waypoint.
Emile-A239 wearing his custom Mark V EVA helmet in Halo: Reach.
Kelly-087 wearing a Mark IV variant of this helmet in Halo: Fall of Reach - Invasion.
- Halo 4 EVA armor skins concept art.jpg
Concept art of the MJOLNIR (GEN2) EVA armor in Halo 4.
- Halo 4 Concept Art by Albert Ng 02a.jpg
Concept art of the EVA armor for Halo 4.
A Spartan-IV wearing GEN2 EVA armor on Exile.
GEN2 EVA in comparison to Hermes in Halo 5: Guardians.
Halo 5: Guardians armor skins
List of appearances
- Halo: Ghosts of Onyx (First appearance)
- Halo 3
- Halo Legends
- Remember Reach
- Halo: Fall of Reach
- Halo: Reach
- Halo 4
- Halo: The Fall of Reach - The Animated Series
- Halo 5: Guardians
- Halo Mythos
- Halo: Retribution
Sources
- ^ a b c d Halo: Ghosts of Onyx - Pages 49, 50, 57
- ^ a b Halo 3 - Armory description
- ^ a b c Cite error: Invalid
<ref>
tag; no text was provided for refs namedEVG
- ^ Halo Waypoint: ABOUT THAT FALL OF REACH ANIMATED SERIES TRAILER
- ^ a b Halo 5: Guardians - EVA [GEN1] Armory description
- ^ Halo Waypoint: Canon Fodder 5/6/2016: Noble Intentions
- ^ Amazon.com Mcfarlane Toys - Product description
- ^ a b c Cite error: Invalid
<ref>
tag; no text was provided for refs namedH4EVG
- ^ a b Halo 5: Guardians - Armory description
- ^ Halo: Retribution, chapter 14