HaloArray.png
Reclaimer - H4.png

MJOLNIR Powered Assault Armor/Mark VI

From Halopedia, the Halo wiki

The MJOLNIR Mark VI Powered Assault Armor issued in October 2552.

"Well, I guess it was all obsolete anyway. Your new suit's a Mark VI, just came up from Seongnam this morning."
— Master Gunns

The MJOLNIR Powered Assault Armor/Mark VI was the third major version of the MJOLNIR Powered Assault Armor. The last mainline MJOLNIR GEN1 suit to be issued to the SPARTAN-IIs,[1] the Mark VI was issued to the few surviving SPARTAN-II supersoldiers in October 2552, replacing the Mark V. Shortly after the end of the Human-Covenant War, it was replaced by the Mark VII[2] and MJOLNIR [GEN2]. However, it could still be requisitioned by SPARTAN-IV personnel as late as 2557.[3][1][4][5]

Overview

Late into the war, as work on the MJOLNIR Mark V was being completed, a top-secret parallel development lab in Seongnam, United Korea, began work on their own prototype of Project: MJOLNIR; this would later become known as MJOLNIR: BLACK, a standalone "skunkworks" prototype of the Mark VI MJOLNIR armor.[6] Using data from the existing and in-development versions of the MJOLNIR armor, the Seongnam team was able to produce a suit with many technical advancements not yet available to the standard MJOLNIR system. After extensive testing of prototype models in combat against the Covenant, the BLACK prototype was eventually inducted into the MJOLNIR line of combat exoskeletons and officially designated as the sixth version.[7] It was approved for use after the loss of Reach and equipped to the surviving SPARTAN-IIs from Reach after their arrival on Earth.

The MJOLNIR Mark VI is capable of taking full advantage of the physical capabilities of a SPARTAN-II. The suit is constructed in overlapping layers. It is a sealed system, capable of extra-vehicular activity and operations in toxic atmosphere. It is hardened against electromagnetic pulses and radiation, and has filters that are completely effective at removing toxins and bacteria from local atmosphere.

The armor's shell is composed of a multilayer alloy of remarkable strength and has been augmented with a refractive coating capable of dispersing a limited number of impacts from Covenant energy weapons. The suit contains a gel-filled layer underneath a thick black armored bodysuit. The gel layer regulates temperature and can reactively change its density. The inner skinsuit is made of a moisture-absorbing synthetic material linked to an environment control computer and the occupant's UNSC-issue neural interface.

An upgrade to the standard Neural Interface is issued to all high-ranking officers; another modified version of the neural lace is issued to all SPARTAN-IIs in the UNSC. This network translates electrochemical signals to digital code and routes them through an interface connection at the rear of the skull. Through this interface, the user's thoughts command the armor's movement and use of weapons, and input from the onboard sensors comes directly to the user's mind. The synthesis of machine and mind is so fast that it is almost impossible to chart reaction time.

Each suit of MJOLNIR Mark VI armor contains a layer of superconducting computer memory. Envisioned by Dr. Halsey, this revolutionary layer forms a network, capable of supporting the kinds of artificial intelligence usually reserved for starships, a piggyback system.

The suits also contain a strength-enhancing layer. This marvel of engineering uses piezoelectric properties to enhance and assist a Spartan's already prodigious muscle power, and grant superhuman feats of might.

The Mark VI generation largely solved problems with the previous versions of MJOLNIR armor. It had an improved energy shielding system, powered by a smaller fusion pack on the wearer's back. This shield system is much stronger and charges more quickly than the Mark V's. The suit also has denser yet less bulky armor plating, these streamlined plates have fewer grapple points than the Mark V so that an enemy has fewer advantages in close combat.[8]

The biggest change, however, was the inclusion of automatic biofoam injectors. With the introduction of the Mark VI, these biofoam injectors have become an integral part of a SPARTAN's ability to function in battle. As a medical gel, it is used to fill and seal wounds automatically, although this process causes extreme pain. However while Biofoam allows a soldier to continue to perform his job without bleeding out, biofoam is only a temporary means of saving a person's life and medical attention must be received soon after before a person suffers more life threatening issues.

In addition, the Mark VI's liquid crystal and hydrostatic gel layers received significant improvements over the previous version. The liquid crystal layer increases the strength of the armor by a factor of five in addition to amplifying the users reaction time by the same factor. The hydrostatic layer features a lock-down device, which protects the muscles and joints of its Spartan wearer from heavy-impact injuries.[9]

In addition to major component upgrades the Mark VI introduce a number of smaller technical improvements to components, these included recoil-compensating actuators which handle weapon feedback, as a SPARTAN is firing a weapon in combat these actuators handle a weapons recoil reducing it without affecting the performance of the Spartan user. The Mark VI also possesses an improved computer system which continuously monitors weapons, biological functions, and motion through intelligent motion tracker.

The third stage in the MJOLNIR evolution, the MJOLNIR Mark VI is a fully neural-linked system. With an onboard artificial intelligence using the human mind for parallel processing, the SPARTAN-II/MJOLNIR combination was the most devastating intelligence tool ever created.

Armor variants

In addition to the standard version of MJOLNIR armor, many variants have been designed for different mission requirements and situations. These variants are the pinnacle of MJOLNIR evolution from design and function gathered from data, feedback, incidents and general design improvements gather throughout the Human-Covenant War.

MJOLNIR Powered Assault Armor/Black

Main article: MJOLNIR Powered Assault Armor/Black

Skunkworks prototype and basis for the future Mark VI armor exclusively used by members of Team Black.[10][11]

Mark VI MJOLNIR Powered Assault Armor/C

Main article: Mark VI MJOLNIR Powered Assault Armor/C variant

A Variant of the Mark VI armor, C Variant is designed specifically for close combat by making joints more mobile and including additional attachments for additional close quarters equipment.

Mark VI MJOLNIR Powered Assault Armor/V

Main article: Mark VI MJOLNIR Powered Assault Armor/V variant

Almost exactly the same as the regular Mark VI, the V Variant is designed specifically for extra-vehicular combat. It has more rounded features and improved armor plating that self-seals, securing its user from almost any punctures created by small shrapnel.

Mark VI MJOLNIR Powered Assault Armor/EOD variant

Main article: Mark VI MJOLNIR Powered Assault Armor/EOD variant

Another Variant of the Mark VI, this armor is designed for situations involving explosive material, for example defusing bombs or removing land mines. The modifications to the armor are designed to limit damage to the wearer in a blast: The shape of the helmet better channels pressure waves, and the shoulders and chest plates have fewer grabbing edges.

Mark VI MJOLNIR Powered Assault Armor/S variant

Main article: MJOLNIR Powered Assault Armor/Mark VI/S variant

The Scout variant, like the Recon variant, has advanced materials that give it stealth capabilities.

Mark VI MJOLNIR Powered Assault Armor/R variant

Main article: Mark VI MJOLNIR Powered Assault Armor/R variant

Developed along side the S Variant armor, the Recon Variant is also designed for stealth missions without losing endurance. The main ways it achieves this are by reducing its infrared signature, reflective surfaces, and Cherenkov electromagnetic emissions.

Mark VI(A) MJOLNIR Powered Assault Armor

Main article: Mark VI(A) MJOLNIR Powered Assault Armor

When the Outer Colonies fell to the Covenant, the UNSC turned to the private sector to produce classified war military hardware. The Rogue variant was one of many armor pieces to be made by private companies.

Armor components

  • Inner skinsuit: The inner skinsuit is made of a moisture-absorbing synthetic material linked to an environmental control computer and the occupant's neural interface. It controls the suit's temperature and actively changes how the suit fits the user.[12]
  • Integrated communications helmet:[13][14] The ICH is one of the most vital aspects of the MJOLNIR system. It is made of Titanium, contains key features like a Heads Up Display, and can identify equipment and display information about it when it is picked up by the wearer. Another feature is the direct neural interface system, which connects to a SPARTAN-II's neural implants. Two core processor chips are implanted into the subjects skull in the rear of the head. This is essentially comparable to an on board computer using parts of the human brain for processing - when the connector at the rear of the subjects head and receptors in the brain link to the helmets on board sensors it creates the neural link needed to move the MJOLNIR suit. The helmet also contains equipment to protect the user in hostile conditions, such as filters to remove toxins from the atmosphere, an oxygen supply to provide air to the wearer during EVA, thermal and motion trackers, radio communicators, solar-powered lighting, and imaging and video gear. The helmet also contains an AI housing located on the back of the helmet.
  • Titanium alloy outer shell: The outer shell of the MJOLNIR armor is comprised of a fairly thick titanium alloy. This plating covers the chest, arms, hip, legs, calves, feet and hands. This alloy is very resilient, can take significant punishment, and is nearly impervious to small arms fire. While enough shots from armor piercing rounds will breach the outer shell, the suit can take a few glancing blows from them without compromising the armor. The outer shell of the all MJOLNIR suits is covered with a refractive coating to help disperse the heat experienced from Covenant energy weapons. However one or two direct hits from any Plasma weapon will compromise the armor plating.
  • Titanium nanocomposite bodysuit: Sandwiched between the external armor and the internal padding is a thick black armored bodysuit. This suit has numerous functions, small but vital to the safety and survival of the wearer. The bodysuit is made of a titanium-based material, making it very strong and yet very flexible. It also serves as another layer of protection against ballistics attacks and is coated with a heat resistant material to disperse heat from Plasma weapons.
  • Hydrostatic gel: Underneath the armored bodysuit is a gel-filled layer, this gel layer regulates the temperature of the suit and can re actively change its density to conform to the wearer's shape - the temperature inside the suit is controlled by the moisture absorbing cloth suit underneath the hydrostatic layer. The hydrostatic gel layer can also be pressurized to various levels to potentially save the wearers life should the wearer be subjected to high G forces or a high velocity impact; however, over-pressurizing this layer can cause nitrogen embolisms.[15] [16]
  • Reactive metal liquid crystal layer: Sandwiched between the external armor and the internal padding is a layer of piezoelectric material that deforms along a preferred axis when exposed to a electric charge. This layer acts as synthetic muscle, allowing the Spartan access to approximately twice their normal strength. This is not due to a "Leverage Effect," but rather that a human-sized suit will provide about six hundred kilos of lifting power, in addition to an average Spartan's six hundred kilos of lifting power. Assuming a Spartan has an average body weight of 200 kilos, and that CPO Mendez's assertion that: "They can lift three times their body weight- which, I might add, is almost double the norm due to their increased muscle density," is indeed accurate.[17] It is to be noted that the MJOLNIR Mk. VI had a greatly improved layer of this material, granting an approximate five times usual strength.
  • Memory-processor superconductor layer: A layer relatively new to the MJOLNIR line, introduced with the Mark V, that is capable of housing an AI. Comprised of the same material as a starship's A.I. system, this layer allows an A.I. to travel with a soldier into the field. The A.I. can then aid the soldier in software intrusion, hardware hacking, and espionage by listening to enemy chatter.[18] As a side note, this layer is often confused with the Reactive Metal Liquid Crystal layer, which due to the latter's piezoelectric properties is impossible.
  • Magnetic weapon holder strips: Available on the Marks IV, V, and VI, the magnetic strips are very small yet powerful magnets place on the legs, waist, and back of the suit and is used to hold any equipment with a magnetic property. The suit also contains a magnet system on the boots of the MJOLNIR suit that allow its wearer to stay attached to a metal surface in Zero G environments and can be toggled on or off by the wearer.
  • Energy shields: First used on the Mark V, and later refined on the Mark VI, the energy shield device is reversed engineered from Covenant technology. Begun in 2532[19] forty scientists and technicians would spend the next 20 years attempting to make some use of the technology. For decades the attempts at cracking their technology had met with failure after failure, some had given up and others in the scientific community believed the energy shield technology could never be cracked. However at some point before 2552 a breakthrough was made and for the first time the UNSC had successfully cracked and improved upon the technology.[20]
  • Pressure seal: The pressure seal is a vital component to the MJOLNIR system, it keeps the system airtight, underwater or in space. The seal is very strong and will only break under extreme pressure, such as in a high velocity impact or when the hydrostatic gel has been over pressurized.
  • Automatic biofoam injectors: Introduced on the Mark VI, biofoam injectors are an integral part of the systems ability that keep a SPARTAN-II functioning in battle. Biofoam is a medical gel that is used to fill and seal a wound automatically, it is also used to treat any infection that could occur as a result of the wound. The process of injecting, or applying the gel to a wound is extremely painful and is only a temporary solution; medical attention must be sought soon after to ensure survivability.
  • Fusion reactor: The fusion reactor is the most essential part of the MJOLNIR system, as it provides power to all equipment on the MJOLNIR armor - the reactor is built into the suit and allows for nearly unlimited movement. The fusion reactor in all versions of the MJOLNIR armor are half the size of a normal fusion pack that conventional marines carry around.[21]
  • Force-multiplying circuits: Located throughout the armor, these systems boost the force applied by the user. They make hand-to-hand combat easier, but also make the armor difficult to adjust to; a slight motion can be translated into a potentially harmful one if not conducted correctly. For this reason it is only possible for Spartans to use this armor, as their strengthened bodies are able to withstand the increased power and speed of movement, which, in un-augmented human bodies, results in broken bones or death, due to spasms caused by the pain of broken bones.
  • Reactive circuits: Reactive Circuits are systems installed directly linked to the Spartan Neural Interface. They amplify the wearer's reaction time by connecting directly to the thoughts of the wearer, making it much easier to control and allowing for the soldier to be both more efficient and have a higher survival rate in combat.
  • Lock-down system: The lock-down system protects muscles and joints from traumatic, high-impact injuries by seizing the suit into a rigid posture through modifying the density of the hydrostatic gel layer.[22][23][24][25]
  • Quantum mirror: A part of the armor's motion sensor system, located in the shoulder pauldron.[26]
  • Fail-safe detonation system - This system functions as a self-destruct mechanism in order to prevent a dead Spartan's armor from being compromised by hostiles. It is activated by a series of digits that only the Spartans know. When engaged, it produces a reactor overload that burns everything within a ten-meter radius, then produces a large blast.[27]

Production notes

Halo 2 and Halo 3

Help.png This section needs expansion. You can help Halopedia by expanding it.

John-117 wears a Mark VI suit throughout the campaigns of Halo 2 and Halo 3. The Mark VI armor experienced minor graphical changes between these two games, most notably in the design of the gauntlets. These changes appear to be purely aesthetic in nature and have no canonical explanation.

Halo: Reach

The Mark VI helmet appears in Halo: Reach as a prototype, possibly the MJOLNIR: Black variant.[14] Two upgrades are available for the helmet, the first of which adds a Command Network Module on the left side with a Hardened Uplink Module-3rd Generation on the right side (FC-I[2]). The second upgrade adds an up-armor plate with a Command Network Module-Improved on the right side. The top part of the helmet has a single white stripe painted down the middle. Additionally, this version's sun visor is colored black, though the fact that it is a prototype may explain the aesthetic difference.[14]

Halo 4

In Halo 4's campaign, John-117 wears his original Mark VI suit, though it is drastically different in appearance from its Halo 2 and Halo 3 incarnations. This is because Cortana used nano-machines stored aboard the Template:UNSCship to repair and upgrade the suit,[28][29] though the gash on the right side of the chest piece was not fixed. The "classic" Mark VI helmet, chest, shoulder, arm, and leg armor are available in the Infinity mode after completion of Halo 4's campaign on Legendary difficulty. Although meant to represent the original, unmodified Mark VI, the classic variant has undergone some slight visual modifications.[3][1][4][5][30]

Trivia

  • In Halo: Reach the letters "FH" appear near the chin area of the Mark VI that is also present on the hood of the Warthog.[31]
  • The armor worn by Operation Firepower from Marvel Comics' Ultimate universe greatly resembles the MJOLNIR Mark VI, combined with elements of Iron Man's armor. The helmet is nearly identical to that of the Mark VI and likewise has an orange face plate, though it features the distinctive eye slits of Iron Man's armor.

Gallery

  • H3 - Awakening.png

    Concept art of a Mark VI suit being fitted onto a Spartan.

  • John-117 wearing the Mark VI.

    John-117 wearing the Mark VI.

  • MJOLNIR Mark VI study.

    MJOLNIR Mark VI study.

  • Mark VI HUD H2.jpg

    The Mark VI HUD in Halo 2.

  • Mark VI HUD H3.jpg

    The Mark VI HUD in Halo 3.

  • The magnification screen of the Mark VI system.

    The magnification screen of the Mark VI system.

  • The upgraded Mark VI HUD in Halo 4.

    The upgraded Mark VI HUD in Halo 4.

  • The MJOLNIR Mark VI as it appears in Halo 2.

    The MJOLNIR Mark VI as it appears in Halo 2.

  • Master Chief 4.jpg

    John-117 wearing the Mark VI in an early version of Halo 2.

  • The wax figure of John-117 in MJOLNIR Mark VI armor at Madame Tussauds.

    The wax figure of John-117 in MJOLNIR Mark VI armor at Madame Tussauds.

  • John-117 wearing the Mark VI.

    John-117 wearing the Mark VI.

  • The Mark VI helmet as seen through a glitch in the Halo: Reach Multiplayer Beta.

    The Mark VI helmet as seen through a glitch in the Halo: Reach Multiplayer Beta.

  • MARKVI IN REACH.png

    The Mark VI in Halo: Reach.

  • The Mark VI's skinsuit.

    The Mark VI's skinsuit.

  • H4 - Chief MJOLNIR.jpg

    John-117's heavily upgraded Mark VI armor.

  • Markviwargames.png

    A view of the Mark VI helmet in "War Games" in Halo 4.

  • Another view of the helmet in Halo 4.

    Another view of the helmet in Halo 4.

  • MarkVI Gen2.png

    Original Mark VI armor as seen in Halo 4.

List of appearances

Sources

  1. ^ a b c Imgur - Halo 4 Mark VI classic
  2. ^ Halo: Glasslands, page 213
  3. ^ a b Halo 4 Armor - ALL Helmets, Torso, and Shoulder + Skins from PAX!
  4. ^ a b Halo 4 Nation - Classic Mark VI
  5. ^ a b Halo 4 News : All Forearms, Legs, Visors, Torsos from PAX Prime
  6. ^ Halo Evolutions Blunt Instruments page 195
  7. ^ Halo Encyclopedia page 89
  8. ^ Halo Encyclopedia page 90
  9. ^ Halo Encyclopedia page 91
  10. ^ Frank O'Connor: Halopedia:News: 21 May 2009/Fred Van Lente and Spartan Black
  11. ^ Halo: Evolutions - Essential Tales of the Halo Universe, Blunt Instruments
  12. ^ Halo: The Fall of Reach, page 71, (2001 edition) page 81, (definitive edition) page 90 (2010 edition)
  13. ^ Halo 3 - MJOLNIR Mark VI helmet description
  14. ^ a b c Halo: Reach, Armory description Cite error: Invalid <ref> tag; name "armory" defined multiple times with different content Cite error: Invalid <ref> tag; name "armory" defined multiple times with different content
  15. ^ Halo: First Strike Chapter 2, page 13
  16. ^ Halo: Ghosts of Onyx Chapter 1, page 36
  17. ^ Halo: The Fall of Reach Chapter 8, Page 92
  18. ^ Halo: The Fall of Reach Chapter 27, Page 286
  19. ^ Halo Encyclopedia Chapter 3, page 89
  20. ^ Halo: The Fall of Reach Chapter 27, page 249
  21. ^ Halo: The Fall of Reach Chapter 13, page 114; chapter 27, page 248
  22. ^ Halo 3, level Arrival
  23. ^ Halo Encyclopedia, page 91
  24. ^ Halo: Reach, level Tip of the Spear
  25. ^ Halo Reach Legendary Edition developer commentary, part 4
  26. ^ Halo: Ghosts of Onyx, page 221
  27. ^ Halo: First Strike, page 315
  28. ^ The Science Behind The Halo Series
  29. ^ Halo 4 Official Site - GAMEPLAY
  30. ^ Halo Waypoint The Halo Bulletin 09.05.12
  31. ^ FH Easter egg

v • d • e
 
List of armor by faction

v • d • e
 
Human
Standard-issue
Powered exoskeleton
Configurations and accessories
v • d • e
 
Covenant
Other equipment
v • d • e
 
Forerunner

Template:SPARTAN Armor

Retrieved from "https://www.halopedia.org/index.php?title=MJOLNIR_Powered_Assault_Armor/Mark_VI&oldid=1010803"