MJOLNIR Powered Assault Armor/Mark VII

MJOLNIR Powered Assault Armor/Mark VII
GEN3 File:HINF - Watchdog armor coating (Mark VII with MA40).png GEN1
Production overview
Manufacturer(s):	Materials Group
Type:	MJOLNIR Powered Assault Armor
Role(s):	Prototype-components testbed for future MJOLNIR iterations
Technical specifications
Feature(s):	Full shield-shaping Nano-technological components

The MJOLNIR Powered Assault Armor/Mark VII was the fourth and last major iteration of the MJOLNIR Powered Assault Armor [GEN1]. The armor's cost led it to be ultimately supplanted by the MJOLNIR [GEN2] line. The Mark VII was issued to at least one of the surviving Spartan-II supersoldiers, Naomi-010, on January 27, 2553.

Specifications and development history

Hypothetical model (2535)

Theoretical design elements for a seventh iteration of MJOLNIR were proposed by Doctor Catherine Halsey in her personal journal in 2535; how many of these features were implemented in the final product is unknown. The Mark VII appeared to have been the last planned phase of the MJOLNIR project at the time. It would have utilized a power system that made use of a combination of plasma and fusion technology, slipspace de-insertion capability, active AI transfer protocols, and limited shaping of the suit's energy shield.

"Slipspace de-insertion capability" means that a Spartan would be able to exit a vessel traveling in slipspace and re-enter normal space, similar to the Long Range Stealth Orbital Insertion Pod. Halsey described "limited shaping of the energy shield" as the ability to form "partial overlaps, airfoils, etc." This incidentally would have been quite similar to the Forerunners' practice of shaping hard light.

Due to unexpected technological breakthroughs, some of these upgrades were implemented earlier than planned and are presumably featured in the production version of the Mark VII. For example, the Mark VI has integrated atmospheric insertion capabilities, which allow a Spartan to free-fall from space without a re-entry vehicle such as an SOEIV. However, this requires a drag chute or parachute, whereas the theoretical Mark VII would have all necessary technology integrated into the suit.

GEN1

The Mark VII was produced by a supplier other than Office of Naval Intelligence's Materials Group, which produced the previous models. It is more lightweight than prior versions. The Mark VII implements several features not exhibited by earlier MJOLNIR incarnations. Most notably, the armor contains nano-technological components which enable the armor to repair and upgrade itself autonomously without outside influences, such as while the user is in cryosleep. The Mark VII also features limited energy shield shaping. Naomi-010's Mark VII suit resembles the Mark V [B], which may be due to the Spartan's choice in her armor's appearance. The Mark VII also is able to recycle urine; this is done with precise calibration on a catheterized Spartan.

GEN2

The Mark VII platform saw some amount of iteration on the GEN2 platform of MJOLNIR development, though proved to be cost-ineffective to mass-produce and was never manufactured in large numbers. In light of the development of the more versatile GEN2 platform which enabled more economical optimization for the different Spartan generations in service, the first generation MJOLNIR was mainly optimized for the Spartan-IIs. However, a number of technologies developed for the Mark VII program were incorporated to the MJOLNIR [GEN2] system, with the NAVIGATOR variant recieving some such technologies for testing on ANVIL Station. The closest GEN2 armor model to the Mark VII is the DECIMATOR variant, though it is mostly unknown outside of the Spartan special forces community.

GEN3

By October 2558, the Mark VII was used as the testbed for the MJOLNIR Powered Assault Armor (GEN3), but it remained uncertain if manufacturers would adopt the standards and cost accounting by the Unified Earth Government. Eventually, the efforts of the Mark VII and DECIMATOR programs alongside similar projects within the Materials Group would dovetail, resulting in the GEN3 Mark VII variant. Design of this armor was selected by Dr. Halsey from Materials Group's KEYSTONE development program. This suit is designed to outfit the latest Spartan contingents with the very best in cutting-edge warfighting technology.

Though it does represent a generational leap for the Mjolnir platform for actively deployed Spartans, some elements tested with the GEN1 and GEN2 Mark VII remain in the prototype stage due to unreliability or cost factors, such as integration of Forerunner-derived nanomachine elements and full shield-shaping.

In-game information

Halo Infinite

Available coatings: Funko, Granular, Monarch, Red Shift, and Watchdog
Funko unlock: Funko Pops tie-in. Code found with Halo Infinite Spartan Mark VII with Commando Rifle (Funko Deco).
Granular unlock: CHIPS AHOY! tie-in. Code found on 300g bags.
Monarch unlock: CHIPS AHOY! tie-in. Code found on 300g bags.
Red Shift unlock: GameStop tie-in.
Watchdog unlock: Reach SR-152 in Halo 5: Guardians.

Gallery

Normal gallery

• 

  Naomi-010 in her GEN1 Mark VII armor.

• 

  GEN3 Mark VII concept art for Halo Infinite.

• 

  A GEN3 Mark VII Spartan MEGA Construx set.

• 

  A GEN3 Mark VII Spartan figure.

• 

  The GEN3 Mark VII variant employing the Monarch armor coating in Halo Infinite.

• 

  The GEN3 Mark VII variant employing the Watchdog armor coating in Halo Infinite.

Halo Infinite skins

• 

  Granular coating

• HINF MarkVII Monarch Coating - Transparent.png

  Monarch coating

• 

  Red Shift coating

• HINF - Watchdog armor coating (Mark VII with MA40).png

  Watchdog coating

List of appearances

• Halo 3 (Mentioned in Halo: The Master Chief Collection only)
• Halo: Reach
  • Dr. Halsey's personal journal (First mentioned)
• Halo: Glasslands (First appearance)
• Halo: The Thursday War
• Halo: Mortal Dictata
• Halo 5: Guardians (Mentioned only)
• Halo Mythos
• Halo: Official Spartan Field Manual (Mentioned only)
• Halo Infinite