This is a featured article

MJOLNIR Powered Assault Armor

From Halopedia, the Halo wiki

Template:Ratings

File:Halo3MC.jpg
Mark VI MJOLNIR armor, being worn by John-117.

The MJOLNIR (Pronunciation: my-ol'nir) Powered Assault Armor is a heavy and complex suit of ground infantry armor of the United Nations Space Command designed to be worn by a Spartan II.

Introduction

The MJOLNIR was designed personally by Dr. Catherine Halsey, a civilian scientist employed by the UNSC Office of Naval Intelligence section three. The armor has undergone several different suits, modifications and upgrades during its development. The armor line is named for the mythical weapon Mjölnir, the hammer of Thor[1], weapon of the Norse god of lightning, thunder, wind, and rain. The origin for the word "Mjölnir" is unknown. The Icelandic verbs mölva (to crush) and mala (to grind) have been suggested as possible translations. Another theory suggests that Mjolnir might be related to the Russian word молния (molniya) and the Welsh word melt (both words being translated to the term as "lightning"). This second theory parallels with the idea that Thor, being a son of the thunder-God, Odin, and a God of Thunder himself, therefore might have used lightning as his weapon. Dr. Halsey's decision to name what most would consider a defensive item after an offensive weapon tells much about her design philosophy for the project, namely that the Spartan-IIs designed to wear the armor would be primarily an offensive force.

Armor Versions

Mark I Prototype Exoskeleton

File:Cyclops.jpg
A Mark 1/2/3 Prototype?

The Mark I battle suits were one of the Navy's first experiments with powered exoskeletons. The Mark I battle armors were bulky exoskeletons that improved the strength and stamina of the user's muscles. A user could lift two tons (4,409 pounds) and run at 32 KPH (19.88 MPH). The armor was nearly impervious to standard light weapons. It could mount a 30mm mini-gun that fired on self-targeting armatures and had stun rounds for training and live rounds for actual combat. It could also be equipped with motion sensors and infrared scopes. The suit used a hydraulic system for movement. The suit consumed enormous amounts of energy, so it required a tethered connection to a fusion generator, which hindered movement, or the use of inefficient broadcast power, and was thus never seen in battle. It was, however, used to carry heavy equipment in docking bays, and dozens of others were dumped in Reach's titanium mines. Mark I Prototype Exoskeleton was also used for trainers to protect them when training Spartans. Dr. Halsey's team scrapped this concept and redesigned the battle armor from the ground up for Project: MJOLNIR.[1]

Mark II PROTOTYPE

The Mark II battle armor incorporated a dramatically slimmed-down profile, but still required a tethered connection to a fusion reactor for power. Although the Mark II prototype had this flaw, it was the strongest type of armor in the entire human arsenal at the time.

Mark III PROTOTYPE

The next prototype, the Mark III, incorporated a wireless power transmitter and receiver so that power could be transmitted directly to it, much like the Orbital Defense Platforms used to defend UNSC colonies. This design was quickly rejected for two reasons: first, the main reason being that the armor still had a limited operational range as it had to remain within range of a bulky, immobile generator, and second, the destruction of the generator would result in the incapacitation of the unit.

MJOLNIR Mark IV

File:Spartan.JPG
The Mk. IV, as seen in the upcoming game Halo Wars

Although the earlier attempts at developing high powered-armor produced designs were impractical for battlefield deployment, this changed as soon as the directive came under Dr. Halsey's MJOLNIR Project. The Mark IV was a radical redesign of the suit taking advantage of many technological innovations. This battle suit was the first to feature full integration with the user's body. The suit plugged directly into the user's nervous system through a standard issue Neural Interface. The suit's many functions utilized the user's thoughts for commands, greatly speeding up the user's movements and reflexes.[2]

This was also the first design to successfully utilize the reactive metal liquid crystal as a means of enhancing locomotion. It enhanced the speed and power of the wearer, a sharp contrast to previous versions which required powered motors to allow the user's mobility. Because of this advancement, the design more closely resembled an actual suit of armor, as opposed to a powered exoskeleton; the user moved the suit, and in return the suit moved the user. This allowed for an incredibly compact design when compared to the previous incarnations.[2]

The success of this version was also dependent upon the parallel development of the Spartan-II program, which produced troops with the physical prowess required to drive the system. Previous attempts to wear the prototype suit by non-augmented troops resulted in their deaths or severe injury due to the extreme reactivity of the system.[2]

The Mark IV armor contained an integrated computer system which continuously monitors weapons, biological function, and motion (through an intelligent motion-sensing radar). It should be noted that the Mark IV did not have energy shields.[2]

The suit was air-tight, hardened against vacuum, and featured air-filtration systems as well as a built-in re-breather that could last for up to 90 minutes. The suit's helmet also featured a standard UNSC mounted flashlight with its own separate power supply. Concealed side compartments in the upper thigh plates allowed the user to holster a sidearm.

The armor plates were specifically designed for combat with the Covenant.[2] It resisted the Covenant's plasma-based weaponry extremely well; a Spartan soldier wearing the Mark IV could survive approximately three times as much damage from plasma weapons than an ODST could in full ballistic re-entry armor. The armor also provided almost complete immunity from ballistic firearms (though for gameplay reasons the Mark IV armor is prone to ballistic damage in the games--which are considered 'more' canon).

The suit also had a number of other features, including recoil-compensating actuators, hydrostatic gel (to regulate and monitor temperature and dampen impact force), and biofoam injectors. However, the biofoam injectors and medical care systems of the Mark IV had to be provided with a direct supply of biofoam, medicines, and stimulants from a standard Marine first aid kit when the user was injured, as the suit would not hold or generate a supply of medicines and biofoam, unlike the Mark VI.

The Mark IV Assault armor was fielded from November 27th, 2525[3] to August 29th, 2552.


MJOLNIR Mark VI

File:01mc.jpg
The MJOLNIR Mark VI as it appears in Halo 2.
File:Mark VI.png
Mark VI armor in Halo 3.

"Well, I guess it was all obsolete anyway. Your new suit's a Mark six, just came up from Songnam this morning"
Master Gunns

The Mark VI battle armor addressed some of the weaknesses of the earlier models. The energy shielding system recharged significantly faster and was notably stronger. The armor plating, while less bulky, was denser, therefore offering as much if not more protection than previous models. The suit was more streamlined than the Mark V, eliminating a number of grapple points that an enemy could use in close-quarters battle. This version of the armor could track the status of two active weapons at the same time, and also included a visual magnification system, allowing the user to see distant objects with ease.

There are anecdotal reports that during John-117's activities in the First Battle of Earth, an improved reactive metal liquid crystal layer had been developed for this suit, increasing the mobility of the Spartan even further, although this has yet to be confirmed. However, this claim may be reinforced by evidence such as faster melee attacks in Halo 2 Campaign, slightly faster jumping speed, and jump height. John-117's physical performance appeared to have improved considerably.

The armor was also capable of healing minor to moderate injuries over a course of time, due to an inboard supply of biofoam, which was automatically injected into the wearer's body, filling and sealing wounds, and numbing the pain. This new capability eliminated the need to manually apply a medkit or seek a field medic in order to tend to injuries. The biofoam effectively treats all but the most critical wounds, and its use was capable of stabilizing the user and allowing him to perform his duties even while injured until such a time as more extensive medical attention was possible. It is also likely that the suit was capable of automatically increasing the pressure level of its hydrostatic gel as the user was falling, explaining the lack of fall damage in the Halo 2. According to the Halo 3 intro cinematic, the Mark VI also included a "lockdown" mode, where the suit retained a rigid form upon sustaining heavy trauma, most likely to avoid further injury. This explains the lack of a rag-doll animation when the player is flying through the air after being hit by a vehicle. However, other NPCs also have this animation, it usually occurs during melee or after getting caught in an explosion.

John-117 is the only confirmed active SPARTAN-II to receive the full Mark VI armor. Fred-104, Linda-058, or Will-043 have received certain parts of the Mark VI.

The MJOLNIR is an adaptable suit of armor, with many variations and modifications possible to it, optimizing it for certain functions.

John-117's armor alters slightly graphically in between Halo 2 and Halo 3. These changes appear to be purely aesthetic in nature and have no canon explanation or reason.

Template:MJOLNIR Variations

Armor Components

Helmet

Main article: Heads Up Display

One of the most important parts of the MJOLNIR armor units was the MJOLNIR Helmet and Visor with its HUD. The helmet also had a small flashlight, which was useful in combat situations in poorly lit areas. It was solar-powered, recharging its energy from the sun when possible, or from the armor itself if necessary. The visor was also polarized to filter the quantity and spectrum of light entering the helmet.

Marathon Reference

The player in Marathon has been speculated to be one of the Mjolnir Mk IV cyborgs that are referred to in terminals throughout the game as being in the Halo universe.

Trivia

File:Pre Halo Suit.jpg
The CMT mod team modeled and skinned a Pre-H1 MC, based on Halo 1 concept art designs.
  • The armor in Halo 3 is still the MJOLNIR Mark VI.
  • In both game manuals and in the books it is said that the armor weighs in at 1000 pounds, or a half-ton. However, in Halo 3, the armor floats and drifts in water. It has been stated that the armor has a feature that enables the suit to change its density, that can be activated by the occupant and that automatically activates upon the user going unconscious. This would prevent Spartans from sinking to the bottom of an ocean and have to walk to shore to get out.
  • In the Half-Life series the armor (Hazardous Environment Suit) worn by the protagonist Gordon Freeman is called the Mark IV in Half-Life, and Mark V in Half-Life 2.
  • In an interview with Frank O'Connor in GamePro magazine, several interesting facts are mentioned. (These facts were also mentioned in a separate interview with Electronic Gaming Magazine.)
    • Frank stated that the Master Chief goes to the bathroom in his armor, and that his urine can be filtered to where he can drink it.
    • Frank also said that the grenades are held onto the Chief's waist by magnetic pads. When asked where the equipment went, he answered, "As for the equipment, how they disappear? That's magic."
    • Furthermore, Frank stated that the slight protrusion above the Master Chief's visor is actually a psychological deterrent against enemies, among other things.
    • Finally, it was stated that the MJOLNIR Mark VI was comprised of a series of nano-technological polymers that allowed the suit to change its color and even create patterns.
  • In the Halo 3 Public Beta, a Spartan's face was visible under the helmet's visor. It could be seen by positioning a player a certain distance away from a Mongoose, and using the camera to view under the model.
  • The Mark V has been growing in popularity in the last few months due to some players expressing a belief that "The Mark V looks more advanced."
  • John-117's preference of armor is currently indefinite, as he does not articulate his feelings on the transition from Mark V to Mark VI armor. This however would most likely come from his military training, in which they would have been taught that "Any help is good help" and similar sayings.
  • Originally, the old design of the Mark V had an antenna on the shoulder.This is seen in the first Halo:Combat Evolved trailer
  • The character Caboose from Red vs Blue, wears the Mark V MJOLNIR Armor (Seen in episode 3 of Red vs Blue: Reconstruction).

Related Links

Sources

Template:MJOLNIR Variations