Main-Forerunner.png
HaloArray.png

Installation 02

From Halopedia, the Halo wiki

Revision as of 02:11, December 5, 2015 by AlertFiend (talk | contribs)
Installation 02
Surface06.jpg
General overview

Description:

Oceans with outcroppings of rock for terrain[1]

Location:

Within the Milky Way

Operation overview

Type:

Halo Installation

Function:

Galactic sterilization/Flood containment and research

Attached AI(s):

007

Date of construction:

Before c. 100,000 BCE

Status:

Deactivated from Installation 00 as of December 2552

 

Installation 02, also known as Epsilon Halo[2], is one of the seven rings that comprise the Halo Array. The environment is water-based with rocky outcroppings and large ice floes.[1]

Background

Installation 02 was one of the six, 10,000-kilometer-wide Halo rings constructed at Installation 00, the second Ark. These Halos were an improvement over a previous array of twelve larger rings built at the greater Ark.[3]

Activation

In 2552, during the Battle of Installation 05, a signal was sent to this Installation from Installation 05, putting it on standby mode. A readout from Installation 05's Control Room showed that Installation 02 was fully prepared to fire on demand.[4]

Deactivation

A more comprehensive readout was later observed in the Installation 00, showing the inner ring to be covered in water, or some form of blue rocks. During the Battle of Installation 00 by Thel 'Vadam, John-117 and the Prophet of Truth, it once again displayed that Installation 02 was on standby mode, being prepared to receive the signal to fire.[5] However, John-117 deactivated all the Installations before they could be fired.

Trivia

The surface of this installation is similar to Ganymede's surface.

Gallery

List of appearances

Sources

  1. ^ a b Halo Encyclopedia, page 174
  2. ^ Halo 3 Texture files: halo_inner_ring
  3. ^ Halo: Cryptum, page 329
  4. ^ Halo 2, campaign level The Great Journey
  5. ^ Halo 3, campaign level The Covenant