Canon

Z-4190 bubble shield: Difference between revisions

From Halopedia, the Halo wiki
mNo edit summary
 
(596 intermediate revisions by more than 100 users not shown)
Line 1: Line 1:
{{Era|H3}}
{{Status|Canon}}
{{Weapon
{{Seealso|Drop shield}}
|image=[[Image:ONI Bubble Shield Armed.jpg||120px]]
{{Weapon infobox
|manufacturer=[[Office of Naval Intelligence]]
|name=Z-4190 bubble shield
|name=Bubble Shield
|image=[[File:Bubble Shield in Action.jpg|300px]]
|type=Equipment
|manufacturer=*[[Forerunner]]
|affiliation=[[United Nations Space Command]]
*[[Office of Naval Intelligence]]
*[[Covenant]]
|series=
|type=Single use dissipative cover{{Ref/Site|Id=universe|URL=https://www.halowaypoint.com/en-us/universe/tech/bubble-shield|Site=Halo Waypoint|Page=Bubble Shield|D=10|M=04|Y=2021}}
|cost=
|variant=
|service=
|length=
|width=
|height=
|weight={{Convert|45.1|lb|kg}}{{Ref/Reuse|universe}}
|ammotype=
|feed-title=Duration
|capacity=
|feed=Single use (20 seconds){{Ref/Book|Id=Enc09|Enc09|Page=340}}
|operation=
|rate=
|velocity=
|optics=
|range=
}}
}}
The '''bubble shield''' {{ZClass|4190|Temporal Protective Enfolder/Stationary Shield|TPE/SS}},{{Ref/Reuse|universe}} is a piece of deployable equipment. It is [[Forerunner]] in origin, but the [[United Nations Space Command]]'s [[Office of Naval Intelligence]] manufactured a number of the devices based on discovery of those formerly used by [[Warrior-Servant]]s.{{Ref/Reuse|universe}}


The '''Bubble Shield''' is an anti-artillery and personal defense device developed by the [[UNSC]]'s [[ONI]] branch.<ref>http://carnage.bungie.org/haloforum/halo.forum.pl?read=765343</ref>. 
==Overview==
== Overview ==
[[File:Bubble Shield.jpg|thumb|left|200px|Late-war deployable shield modules created a gold, dome-like protective area for approximately 20 seconds when activated.]]
[[Image:Bubble Shield.jpg|thumb|left|200px|The Bubble Shield creates a golfball like protective area for approximately 20 seconds when activated.]]
===Design details===
The '''Bubble Shield''' projects a transparent, slightly yellow tinted defensive sphere. The shield itself is similar to a [[Wikipedia:Geodesic dome|Geodesic dome]], made of tessellating hexagons. The shield protects against bullets, lasers, plasmas, flames, and other projectiles used primarily by the Marine forces of the [[UNSC]] and [[The Covenant]]. A bubble shield is used in the original teaser trailer for Halo 3. It is shown used by the Master Chief to stop an incoming rocket.  Vehicles and players however, are still able to pass through it.  After a significant amount of time has passed or if the shield generator has taken enough damage, it will collapse. [[Covenant Loyalists]], mainly the [[Brutes]] have been known to secure human weapons and equipment for their own ends, the bubble shield being one of of the most common.
"Dissipative"-style bubble shields are a technology originally of [[Forerunner]] origin. They were used by the [[Warrior-Servant]]s and various forms of [[Sentinel]] for protection, and later reverse-engineered by both the [[Covenant]] and [[Office of Naval Intelligence]] to form crude copies for use as battlefield deployable equipment.{{Ref/Reuse|universe}}


==Development==
The bubble shield design used by humanity and the Covenant consists of an emitter capable of projecting a translucent, slightly white/gold tinted protective sphere sphere of interlocking hexagonal force enfolder elements around the user.{{Ref/Reuse|universe}} The shield itself is similar to a [[Wikipedia:Geodesic dome|geodesic dome]], made of tessellating hexagons. The shield protects against bullets, explosions, [[laser]]s, [[plasma]], flames, [[grenade]]s, and other projectiles. Vehicles and personnel, however, are still able to pass through it. After approximately 20 seconds have passed since activation, the shield will collapse and the generator self-destructs. Heavier stationary weaponry, such as the {{Pattern|Shuku|sentry turret}}, are capable of overpowering or firing through the shield.{{Ref/Map|H3|Snowbound}}{{Ref/Book|Enc11|Page=345|Detail=Although the Automated Plasma Turret caption pictures a {{Pattern|Zo'op|Weevil}}, the descriptive text refers to the Snowbound sentry guns.}}
The Bubble Shield was created by the [[Office of Naval Intelligence]]. However it is not known if it was created with human technology or if it was reverse engineered similar to how the [[MJOLNIR Mark V]] [[Energy Shields|energy shields]] were created. The Bubble Shield technology is nearly identical to the Covenant [[Shield Door]]s in function.


===Deployment===
===Development history===
<!--The EVG states that humans made theirs based on captured Covenant examples. Waypoint states the opposite. This is the only way this can make sense.-->
The bubble shield has a storied developmental history among the Covenant and the UNSC. The original designs for the bubble shield are based on Forerunner technology, used by the [[Warrior-Servant]]s and some forms of [[Aggressor Sentinel|Aggressor]] and [[Protector Sentinel (Trove)|Protector Sentinel]].{{Ref/Reuse|universe}} These devices were crudely reverse-engineered by the Covenant, with examples themselves captured by the UNSC and used as the basis for the development of a bubble shield of [[human]] make during the later years of the [[Human-Covenant War]].{{Ref/Book|Id=EVG|EVG|Page=47}} During the [[Fall of Reach]], many of the ONI prototypes for the deployable bubble shield were captured by Covenant forces and were crudely copied for use by loyalist [[Jiralhanae]] forces in the war's final months - particularly the [[Battle for Earth]] and [[Battle of Installation 00]].{{Ref/Reuse|universe}}


Despite being UNSC technology, UNSC Marines rarely deploy it during the campaign, while Brutes deploy it often. At least one or two Brutes in a Covenant battle squad always have a bubble shield on hand. Brutes generally activate their bubble shields immediately following aerial insertion and when in large numbers.
ONI research into bubble shield technology also resulted in the development of a [[MJOLNIR Powered Assault Armor]]-compatible [[Armor abilities|reusable armour ability]] known as the [[drop shield]].{{Ref/Book|Id=Enc11DropShield|Enc11|Page=355}} Manufacture of ONI-approved bubble shield devices continued until [[2555]], at which point they were discontinued and development efforts were refocused toward MJOLNIR-compatible emitters.{{Ref/Reuse|universe}}


==Multiplayer Strategies==
==Operational history==
Bubble shields were used by the [[Warrior-Servant]] forces of the Forerunner [[Ecumene]] to provide temporary battlefield fortifications, with similar systems employed as the standard energy shielding mechanisms of various Sentinel classes.


The bubble shield is a very useful piece of equipment in the multiplayer game. These are a few strategies that you should know if you want to use the bubble shield to its full potential. If you have just been in a close range fight with another player and your shields are down, it is often a good idea to use a bubble shield to give your shields time to recharge before you go frag your next victim. Also if you have a shotgun or sword in your secondary and a player with a regular weapon (assault rifle or BR) is running to you, drop the shield so that they will come through the shield and finish you. Right before the player get to the shield, pull out your sword/shotgun and blast them when they step through. If you do not have a close range weapon, use this same strategy except with a frag or spike grenade. Time the grenade so that it will explode right as they step through while you step out the other side of the shield to avoid damage. A good way to kill someone in a bubble shield is with the sniper rifle. Make sure you are in a safe position so you don't get assassinated, aim at the player's head which will be easy because people usually don't move when they are in a shield. Keep on the player's head and as soon as the shield disappears shoot them, while it may seem very simple most players do not see this coming and never expect it.
During the [[Human-Covenant War]], [[human]]ity were able to leverage bubble shield technology stolen from Covenant derivatives of the Forerunner originals in a number of forms. One such device was used by [[Blue Team]] during [[Operation: WARM BLANKET]] in [[2544]], to safely secure their boarding of the Covenant carrier ''[[Resplendent Fervor]]''.{{Ref/Film|HLeg|Episode=The Package (animated short)|The Package}} Another such system was later featured in a number of the [[Project HRUNTING|HRUNTING]]/[[Project YGGDRASIL|YGGDRASIL]] development program prototypes including the [[HRUNTING/YGGDRASIL Mark I ADS|Mark I ADS]] and select [[Reactive Cyclops|refit packages]] for the [[HRUNTING Mark III (S) Cyclops|Mark III [S] Cyclops]].{{Ref/Film|HLeg|Episode=Prototype}}{{Ref/Game|HW2|[[Reactive Cyclops]] Blitz unit}} Forms of bubble shield technology continued to be developed and used by UNSC forces through the late-war, with ONI developing the drop shield armour ability package based on the same operating principles, later used during the [[Fall of Reach]].{{Ref/Reuse|Enc11DropShield}} Many of these designs were stolen from Reach by Covenant forces, and further developed and used by the Brute loyalist troops during the final weeks of the war.{{Ref/Game|H3|Bubble Shield in-game equipment}}{{Ref/Game|H3ODST|Bubble Shield in-game equipment}} Due to their size, mass, and relatively short power cell duration, along with low rates of production, Bubble Shields saw very limited use during the last stages of the Human-Covenant War.{{Ref/Reuse|universe}}


==Trivia==
During [[UNSC Tactical Simulator|simulations]] of the [[Battle of Installation 03]] and [[Battle of New Phoenix]] a [[Unidentified Spartan-IV|Spartan-IV]] utilized a [[armor abilities|version]] capable of allowing the user to fire weapons at targets while remaining inside the shield.{{Ref/Game|HSS|Bubble Shield in-game equipment}} By 2555, production of ONI produced bubble shields was halted in favour of focus on MJOLNIR energy shielding,{{Ref/Reuse|universe}} though the existing prototypes continued to see use as late as [[2558#January|January 21, 2558]], in which [[SPARTAN-G059]] deployed a bubble shield against [[Avu Med 'Telcam]] to block his {{Pattern|Vostu|carbine}}'s rounds during her [[Assassination of Avu Med 'Telcam|assassination mission]].{{Ref/Comic|HTFS|Story=Knight takes Bishop}}
*In an early Halo 3 build the bubble shield was able to roll like the [[Power Drain]].
*This shield resembles the description of the [[Onyx Sentinel]] shields in the [[Eric Nylund]] novel [[Ghosts of Onyx]].
*With no Damage modifiers, a melee with most weapons will destroy the shield generator.
*It is confused to be a Brute weapon, since Brutes always activate these devices, however it was developed by UNSC.
*A disadvantage of the bubble shield is that it also contains explosions ''inside'' the shield. This means opponents can walk right through the shield and throw a [[grenade]] and walk right out of it while the grenade explodes damaging anyone inside the shield. This is especially effective if a [[Spike Grenade]] is used as the ricocheting fragments create a "Bubble of Death".
*The original bubble shield was smaller and was in the shape of a V. As seen in the Starry Night video.
*In the final version of Halo 3, the Bubble Shield gives off a yellow glow.
*The Bubble Shield will not protect you against the turrets guarding the outer perimeter of the multiplayer map [[Snowbound]]. This is strange considering that it can withstand several direct hits from virtually any weapon in the game, including a [[Scarab|Scarab's]] main gun.
*A very fun thing to do using the Bubble Shield is to use it against Covenant, it gets good quotes.
*You can actually move a Bubble Shield by throwing a [[Power Drain]] at the generator.
*The Bubble Shield logo, along with the [[Trip Mine]] logo, is a Halo 3 emblem.
*In the Starry Night Video the Bubble Shield looked, and was deployed, more like a grenade.


==Cons of the Bubble Shield==
As of [[2559]], bubble shield technology has been leveraged by the forces of both {{UNSCShip|Spirit of Fire}} and the [[Banished]] during their [[Second Ark Conflict|war for]] control of the Ark.{{Ref/Game|HW2|Reactive Blitz units}}
*Enemies can walk in and kill you.
*You cant fire back while in the center.
*The bubble shield only lasts around 20 seconds.
*If an enemy throws one inside the Bubble Shield, it stays inside and will kill almost everyone in the shield at the present time.
*Flood forms will usually just run inside the bubble shield and attack you unlike other enemies who usually wait for it to disappear.


==Images==
==In-game information==
<GALLERY>
===''Halo 3'' and ''Halo 3: ODST''===
Image:Bubble Shield in Action.jpg|The Bubble Shield.
[[File:Bubbleshield gx1-1.jpg|200px|thumb|Comparison between deployed and undeployed bubble shield.]]
Image:Bubble Shield Logo.jpg|The Bubble Shield logo.
In the [[campaign]] of ''[[Halo 3]]'', [[Jiralhanae|Brutes]] deploy bubble shields often. At least one or two Brutes in a Covenant [[pack]] always have a bubble shield on hand. Brutes generally activate their bubble shields immediately when taking fire or when feeling threatened. Unlike the [[multiplayer]] "[[shield door]]s", vehicles are able to pass through the bubble shield. Damaging the shield generator itself in the bubble's enclosure will cause it to explode, and the shield will collapse upon detonation. Upon reaching its energy limit, bubble shields will make a high-pitched sound prior to overloading and exploding. In ''[[Halo: Spartan Strike]]'' the bubble shield can be used repeatedly with a duration of 8 seconds and a cooldown of 24 seconds.
Image:Avatars_Halo_Halo3_Shield.jpg|The Bubble Shield activating in the [[Starry Night]] trailer.
 
Image:Bubble Shield Demonstration.jpg|The Bubble shield can block a [[Particle Beam Rifle]] shot.
;Disadvantages
Image:1179249572.jpg|The Bubble shield is capable of blocking practically all forms of attack throughout it's duration, including [[Spartan Laser]]s.
* Enemies can enter the shield freely.
Image:Brute activates a bubble shield.jpg|A [[Brute]] activates a Bubble Shield.
* The bubble shield only lasts about 20 seconds. In combat, however, this is more than enough time to regroup and recover.
</GALLERY>
* If either the player or an enemy throws a grenade inside the bubble shield, it stays inside and will more than likely kill almost everyone in the shield at that time. This strategy is most effective with [[Type-2 spike grenade|spike grenades]], as the spikes will bounce around and shred anything inside the shield.
* The generator is very delicate, and if shot from the inside, it will quickly explode and destroy the bubble shield.
* Vehicles can also enter bubble shields. Therefore, you can run somebody over while they are still in the bubble shield.
* The bubble shield can be affected by other equipment if thrown within the shield's proximity. For example, if an opponent throws in a [[portable gravity lift]] near the generator, the gravity lift can raise the shield generator up, leaving anyone previously inside the shield defenseless. Additionally, effects from equipments can also be limited in the shield; if a [[regenerator]] is thrown inside the bubble shield, only those within the shield are affected. Likewise, if a [[power drain]] is thrown inside an active bubble shield, the disabling effects of the power drain are contained within the bubble shield.
* The bubble shield can be knocked away by throwing a power drain or [[radar jammer]] at the generator, causing both objects to roll, and leaving anybody previously inside the shield exposed.
 
== Trivia ==
{{Linkbox|gallery=yes|gameplay=yes}}
* An early form of the bubble shield was used in the [[Starry Night|original teaser trailer]] for Halo 3. It is shown being used by [[John-117]] to protect him from an incoming [[Zurdo-pattern Wraith|Wraith]] mortar. In the teaser trailer, the bubble shield looked like a type of grenade, leading to rumors that it would be one of the new grenade types.
* The bubble shield is capable of negating the effects of a [[Kill Ball]], allowing players to go inside the ball.
* When deployed on an Elephant, the bubble shield does not work as intended- high-powered weapons such as the Spartan Laser will shoot right through, killing the user inside. However, five or more bubble shields will protect players inside its dome.
* In ''[[Halo: Spartan Strike]]'', only Elite Majors are issued with bubble shields, while the player can equip it as default on certain missions.
 
== Gallery ==
<gallery>
File:BubbleShield StarryNight.jpg|An early model of the bubble shield in the ''[[Starry Night]]'' trailer.
File:Avatars Halo Halo3 Shield.jpg|The bubble shield activating in the ''Starry Night'' trailer.
File:1179249572.jpg|The bubble shield is capable of blocking practically all forms of attack throughout its duration, including [[M6 Spartan Laser|Spartan Laser]] shots.  Note the clear color from the ''[[Halo 3 Beta]]''.
File:Bubbleshieldhud.svg|The bubble shield's HUD icon.
File:H3-BubbleShield.png|View of the bubble shield in ''Halo 3''.
File:BubbleShield-2views.jpeg|Active and inactive states of the bubble shield.
File:Brute activates a bubble shield.jpg|A Brute activates a bubble shield.
File:HSS-Gameplay-Shielded.jpg|The bubble shield being used in ''[[Halo: Spartan Strike]]''.
File:TelcamBS.png|SPARTAN-G059 deploys a bubble shield over Avu Med 'Telcam in ''[[Knight takes Bishop]]''.
File:HW2 Blitz Reactive Cyclops.png|A [[Cyclops]] with a bubble shield in ''[[Halo Wars 2]]''.
File:HW2 Blitz Reactive Marines.png|Marines with a bubble shield.
File:HW2 Alice's Blitz Bubble Shield.png|Alice-130 with a bubble shield.
HW2_Reflective_Shields_Banished.png|Unique bubbles shields employed by the Banished.
</gallery>
 
== List of appearances ==
*''[[Starry Night]]'' {{1st}}
*''[[Halo 3]]''
*''[[Halo Wars]]''
*''[[Halo 3: ODST]]''
*''[[Halo Legends]]''
**''[[Prototype]]''
**''[[The Package (animated short)|The Package]]''
**''[[Odd One Out]]'' {{C|non-canon appearance}}
*''[[Halo: Spartan Strike]]''
*''[[Halo: Tales from Slipspace]]''
**''[[Knight Takes Bishop]]''
*''[[Halo Wars 2]]''
*''[[Halo: Official Spartan Field Manual]]'' {{mo}}


==Sources==
==Sources==
<references/>
{{Ref/Sources}}
 
{{Equipment List}}


{{Navbox/Pickups/Gameplay}}


[[Category:Halo 3]]
[[Category:Shield technology]]
[[Category:Armor abilities]]
[[Category:Equipment]]

Latest revision as of 19:22, October 15, 2023

Were you looking for Drop shield?
Z-4190 bubble shield
Bubble Shield in Action.jpg
Production overview

Manufacturer:

Type:

Single use dissipative cover[1]

Specifications

Weight:

45.1 pounds (20.5 kg)[1]

Duration:

Single use (20 seconds)[2]

 

The bubble shield (UNSC Z-classification: Z-4190 Temporal Protective Enfolder/Stationary Shield, Z-4190 TPE/SS),[1] is a piece of deployable equipment. It is Forerunner in origin, but the United Nations Space Command's Office of Naval Intelligence manufactured a number of the devices based on discovery of those formerly used by Warrior-Servants.[1]

Overview[edit]

Late-war deployable shield modules created a gold, dome-like protective area for approximately 20 seconds when activated.

Design details[edit]

"Dissipative"-style bubble shields are a technology originally of Forerunner origin. They were used by the Warrior-Servants and various forms of Sentinel for protection, and later reverse-engineered by both the Covenant and Office of Naval Intelligence to form crude copies for use as battlefield deployable equipment.[1]

The bubble shield design used by humanity and the Covenant consists of an emitter capable of projecting a translucent, slightly white/gold tinted protective sphere sphere of interlocking hexagonal force enfolder elements around the user.[1] The shield itself is similar to a geodesic dome, made of tessellating hexagons. The shield protects against bullets, explosions, lasers, plasma, flames, grenades, and other projectiles. Vehicles and personnel, however, are still able to pass through it. After approximately 20 seconds have passed since activation, the shield will collapse and the generator self-destructs. Heavier stationary weaponry, such as the Shuku-pattern sentry turret, are capable of overpowering or firing through the shield.[3][4]

Development history[edit]

The bubble shield has a storied developmental history among the Covenant and the UNSC. The original designs for the bubble shield are based on Forerunner technology, used by the Warrior-Servants and some forms of Aggressor and Protector Sentinel.[1] These devices were crudely reverse-engineered by the Covenant, with examples themselves captured by the UNSC and used as the basis for the development of a bubble shield of human make during the later years of the Human-Covenant War.[5] During the Fall of Reach, many of the ONI prototypes for the deployable bubble shield were captured by Covenant forces and were crudely copied for use by loyalist Jiralhanae forces in the war's final months - particularly the Battle for Earth and Battle of Installation 00.[1]

ONI research into bubble shield technology also resulted in the development of a MJOLNIR Powered Assault Armor-compatible reusable armour ability known as the drop shield.[6] Manufacture of ONI-approved bubble shield devices continued until 2555, at which point they were discontinued and development efforts were refocused toward MJOLNIR-compatible emitters.[1]

Operational history[edit]

Bubble shields were used by the Warrior-Servant forces of the Forerunner Ecumene to provide temporary battlefield fortifications, with similar systems employed as the standard energy shielding mechanisms of various Sentinel classes.

During the Human-Covenant War, humanity were able to leverage bubble shield technology stolen from Covenant derivatives of the Forerunner originals in a number of forms. One such device was used by Blue Team during Operation: WARM BLANKET in 2544, to safely secure their boarding of the Covenant carrier Resplendent Fervor.[7] Another such system was later featured in a number of the HRUNTING/YGGDRASIL development program prototypes including the Mark I ADS and select refit packages for the Mark III [S] Cyclops.[8][9] Forms of bubble shield technology continued to be developed and used by UNSC forces through the late-war, with ONI developing the drop shield armour ability package based on the same operating principles, later used during the Fall of Reach.[6] Many of these designs were stolen from Reach by Covenant forces, and further developed and used by the Brute loyalist troops during the final weeks of the war.[10][11] Due to their size, mass, and relatively short power cell duration, along with low rates of production, Bubble Shields saw very limited use during the last stages of the Human-Covenant War.[1]

During simulations of the Battle of Installation 03 and Battle of New Phoenix a Spartan-IV utilized a version capable of allowing the user to fire weapons at targets while remaining inside the shield.[12] By 2555, production of ONI produced bubble shields was halted in favour of focus on MJOLNIR energy shielding,[1] though the existing prototypes continued to see use as late as January 21, 2558, in which SPARTAN-G059 deployed a bubble shield against Avu Med 'Telcam to block his Vostu-pattern carbine's rounds during her assassination mission.[13]

As of 2559, bubble shield technology has been leveraged by the forces of both UNSC Spirit of Fire and the Banished during their war for control of the Ark.[14]

In-game information[edit]

Halo 3 and Halo 3: ODST[edit]

Comparison between deployed and undeployed bubble shield.

In the campaign of Halo 3, Brutes deploy bubble shields often. At least one or two Brutes in a Covenant pack always have a bubble shield on hand. Brutes generally activate their bubble shields immediately when taking fire or when feeling threatened. Unlike the multiplayer "shield doors", vehicles are able to pass through the bubble shield. Damaging the shield generator itself in the bubble's enclosure will cause it to explode, and the shield will collapse upon detonation. Upon reaching its energy limit, bubble shields will make a high-pitched sound prior to overloading and exploding. In Halo: Spartan Strike the bubble shield can be used repeatedly with a duration of 8 seconds and a cooldown of 24 seconds.

Disadvantages
  • Enemies can enter the shield freely.
  • The bubble shield only lasts about 20 seconds. In combat, however, this is more than enough time to regroup and recover.
  • If either the player or an enemy throws a grenade inside the bubble shield, it stays inside and will more than likely kill almost everyone in the shield at that time. This strategy is most effective with spike grenades, as the spikes will bounce around and shred anything inside the shield.
  • The generator is very delicate, and if shot from the inside, it will quickly explode and destroy the bubble shield.
  • Vehicles can also enter bubble shields. Therefore, you can run somebody over while they are still in the bubble shield.
  • The bubble shield can be affected by other equipment if thrown within the shield's proximity. For example, if an opponent throws in a portable gravity lift near the generator, the gravity lift can raise the shield generator up, leaving anyone previously inside the shield defenseless. Additionally, effects from equipments can also be limited in the shield; if a regenerator is thrown inside the bubble shield, only those within the shield are affected. Likewise, if a power drain is thrown inside an active bubble shield, the disabling effects of the power drain are contained within the bubble shield.
  • The bubble shield can be knocked away by throwing a power drain or radar jammer at the generator, causing both objects to roll, and leaving anybody previously inside the shield exposed.

Trivia[edit]

Main-Legendary.png See our gameplay information related to Z-4190 bubble shield on its gameplay page.
Main-Superintendent.png Browse more images in this article's gallery page.
  • An early form of the bubble shield was used in the original teaser trailer for Halo 3. It is shown being used by John-117 to protect him from an incoming Wraith mortar. In the teaser trailer, the bubble shield looked like a type of grenade, leading to rumors that it would be one of the new grenade types.
  • The bubble shield is capable of negating the effects of a Kill Ball, allowing players to go inside the ball.
  • When deployed on an Elephant, the bubble shield does not work as intended- high-powered weapons such as the Spartan Laser will shoot right through, killing the user inside. However, five or more bubble shields will protect players inside its dome.
  • In Halo: Spartan Strike, only Elite Majors are issued with bubble shields, while the player can equip it as default on certain missions.

Gallery[edit]

  • An early model of the bubble shield in the Starry Night trailer.

    An early model of the bubble shield in the Starry Night trailer.

  • The bubble shield activating in the Starry Night trailer.

    The bubble shield activating in the Starry Night trailer.

  • The bubble shield is capable of blocking practically all forms of attack throughout its duration, including Spartan Laser shots. Note the clear color from the Halo 3 Beta.

    The bubble shield is capable of blocking practically all forms of attack throughout its duration, including Spartan Laser shots. Note the clear color from the Halo 3 Beta.

  • The bubble shield's HUD icon.

    The bubble shield's HUD icon.

  • View of the bubble shield in Halo 3.

    View of the bubble shield in Halo 3.

  • Active and inactive states of the bubble shield.

    Active and inactive states of the bubble shield.

  • A Brute activates a bubble shield.

    A Brute activates a bubble shield.

  • The bubble shield being used in Halo: Spartan Strike.

    The bubble shield being used in Halo: Spartan Strike.

  • SPARTAN-G059 deploys a bubble shield over Avu Med 'Telcam in Knight takes Bishop.

    SPARTAN-G059 deploys a bubble shield over Avu Med 'Telcam in Knight takes Bishop.

  • A Cyclops with a bubble shield in Halo Wars 2.

    A Cyclops with a bubble shield in Halo Wars 2.

  • Marines with a bubble shield.

    Marines with a bubble shield.

  • Alice-130 with a bubble shield.

    Alice-130 with a bubble shield.

  • Unique bubbles shields employed by the Banished.

    Unique bubbles shields employed by the Banished.

List of appearances[edit]

Sources[edit]

  1. ^ a b c d e f g h i j k Halo Waypoint, Bubble Shield (Retrieved on Apr 10, 2021) [archive]
  2. ^ Halo Encyclopedia (2009 edition), page 340
  3. ^ Halo 3, multiplayer map Snowbound
  4. ^ Halo Encyclopedia (2011 edition), page 345: Although the Automated Plasma Turret caption pictures a Zo'op-pattern Weevil, the descriptive text refers to the Snowbound sentry guns.
  5. ^ Halo: The Essential Visual Guide, page 47
  6. ^ a b Halo Encyclopedia (2011 edition), page 355
  7. ^ Halo Legends, episode The Package (animated short), timestamp The Package
  8. ^ Halo Legends, episode Prototype
  9. ^ Halo Wars 2, Reactive Cyclops Blitz unit
  10. ^ Halo 3, Bubble Shield in-game equipment
  11. ^ Halo 3: ODST, Bubble Shield in-game equipment
  12. ^ Halo: Spartan Strike, Bubble Shield in-game equipment
  13. ^ Halo: Tales from Slipspace - Knight takes Bishop
  14. ^ Halo Wars 2, Reactive Blitz units

v • d • e
 
List of map pickups in the Halo series
Retrieved from "https://www.halopedia.org/index.php?title=Z-4190_bubble_shield&oldid=1598292"