Canon

Semi-Powered Infiltration armor: Difference between revisions

From Halopedia, the Halo wiki
 
(40 intermediate revisions by 16 users not shown)
Line 1: Line 1:
{{Era|HCW|Post}}
{{Status|Canon}}
{{Armor infobox
{{Armor infobox
|name=Semi-Powered Infiltration armor
|name=Semi-Powered Infiltration armor
Line 7: Line 7:
|type=
|type=
|role=Stealth/assault
|role=Stealth/assault
|hideb=y
}}
}}
The '''Semi-Powered Infiltration armor''' ('''SPI armor''') is a [[UNSC]] combat [[armor]] system designed with an emphasis on stealth through the use of [[photoreactive panel|special photoreactive panels]].<ref name="goo14">'''[[Halo: Ghosts of Onyx]]''', ''page 14''</ref> The armor was developed by the [[Watershed Division]], with [[Ruk Ariaustin]] as design lead.{{Ref/Reuse|HM}}
The '''Semi-Powered Infiltration armor''' ('''SPI armor''') is a [[United Nations Space Command]] combat [[armor]] system designed with an emphasis on stealth through the use of [[Photoreactive panel|special photoreactive panels]].<ref name="goo14">'''[[Halo: Ghosts of Onyx]]''', ''page 14''</ref> The armor was developed by the [[Watershed Division]], with [[Ruk Ariaustin]] as design lead.{{Ref/Reuse|HM}}


== Overview ==
== Overview ==
Described as "part legionnaire mail, part tactical body armor, and part chameleon", the SPI armor features [[photoreactive panel]]s that mimic the surrounding textures, effectively being the UNSC equivalent to the [[Covenant]]'s [[active camouflage]] systems.<ref>'''Halo: Ghosts of Onyx''', ''page 16''</ref> The SPI armor features a full body armor with an enclosed helmet and [[heads-up display]]. The undersuit is equipped with a cushioning layer of liquid nanocrystal that provides more ballistic protection than three centimeters of [[wikipedia:Kevlar|Kevlar]] diamond weave, without the bulk.<ref name="goo171">'''Halo: Ghosts of Onyx''', ''page 171''</ref> The hardened armor plates, though advanced compared to standard UNSC infantry armor, can take only a few glancing blows before failing.{{Ref/Reuse|goo14}}
Described as "part legionnaire mail, part tactical body armor, and part chameleon", the SPI armor features [[photoreactive panel]]s that mimic the surrounding textures, effectively being the UNSC equivalent to the [[Covenant]]'s [[active camouflage]] systems.<ref>'''Halo: Ghosts of Onyx''', ''page 16''</ref> The SPI armor features a full body armor with an enclosed helmet and [[heads-up display]]. The undersuit is equipped with a cushioning layer of liquid nanocrystal that provides more ballistic protection than three centimeters of [[wikipedia:Kevlar|Kevlar]] diamond weave, without the bulk.<ref name="goo171">'''Halo: Ghosts of Onyx''', ''page 171''</ref> The hardened armor plates, though advanced compared to standard UNSC infantry armor, can take only a few glancing blows before failing.{{Ref/Reuse|goo14}}


Though more advanced than the [[Orbital Drop Shock Troopers]]' [[ODST armor|body armor]], the SPI armor is less powerful than the [[Mjolnir armor]] originally issued to the [[Spartan-II]]s.<ref>'''[[Halo: Glasslands]]''', ''page 207''</ref> Its main benefit is that it is drastically cheaper to produce than Mjolnir.<ref name="goo46">'''Halo: Ghosts of Onyx''', ''page 46''</ref> Although the SPI suit provides modest enhancements to the wearer's strength and mobility,{{Ref/Reuse|HM}} this amplification is not as drastic as that afforded by the Mjolnir.<ref>'''Halo: Last Light''', ''page 33'' (Google Play edition)</ref> Consequently, the SPI armor can be worn by any individual and does not require special neurological, skeletal or muscular [[Biological augmentation|augmentation]]; for example, the unaugmented instructors for the Spartan-IIIs often wore SPI armor.<ref>'''Halo: Ghosts of Onyx''', ''pages 89, 94''</ref>{{Ref/Reuse|g164}} The SPI armor is not as bulky or as heavy as the Mjolnir armor,<ref>'''Halo: Glasslands''', ''page 40''</ref> although the plating material is also less durable: [[Kelly-087]] dented a Spartan-III's chest plate with her fist when first encountering the Spartan-IIIs.<ref name="goo168">'''Halo: Ghosts of Onyx''', ''pages 168-169''</ref>
Though more advanced than the [[Orbital Drop Shock Troopers]]' [[ODST armor|body armor]], the SPI armor is less powerful than the [[MJOLNIR Powered Assault Armor]] originally issued to the [[SPARTAN-II program|SPARTAN-II]]s.<ref>'''[[Halo: Glasslands]]''', ''page 207''</ref> Its main benefit is that it is drastically cheaper to produce than Mjolnir.<ref name="goo46">'''Halo: Ghosts of Onyx''', ''page 46''</ref> The cost reduction meant that dozens to hundreds of suits of SPI could be produced for the cost of a single suit of [[MJOLNIR Powered Assault Armor/Mark IV|Mark IV]].{{Ref/Site|Id=CFAA|URL=https://www.halowaypoint.com/en-us/news/anniversary-armory|Site=Halo Waypoint|Page=Canon Fodder - Anniversary Armory|D=24|M=02|Y=2024}} Although the SPI suit provides modest enhancements to the wearer's strength and mobility,{{Ref/Reuse|HM}} this amplification is not as drastic as that afforded by the Mjolnir.<ref>'''Halo: Last Light''', ''page 33'' (Google Play edition)</ref> Consequently, the SPI armor can be worn by any individual and does not require special neurological, skeletal or muscular [[Biological augmentation|augmentation]]; for example, the unaugmented instructors for the Spartan-IIIs often wore SPI armor.<ref>'''Halo: Ghosts of Onyx''', ''pages 89, 94''</ref>{{Ref/Reuse|g164}} The SPI armor is not as bulky or as heavy as the Mjolnir armor,<ref>'''Halo: Glasslands''', ''page 40''</ref> although the plating material is also less durable: [[Kelly-087]] dented a Spartan-III's chest plate with her fist when first encountering the Spartan-IIIs.<ref name="goo168">'''Halo: Ghosts of Onyx''', ''pages 168-169''</ref>
 


The SPI armor generally lacks an [[energy shielding]] system, making the user far more vulnerable to enemy fire. However, the Spartan-III [[Headhunters]] wore experimental armor that was equipped with energy shields due to their elite nature and value. However, power must be drawn from the energy shields to recharge the suit's active camouflage module.<ref name="head212">'''[[Halo: Evolutions - Essential Tales of the Halo Universe]]''', "[[Headhunters]]", ''page 212''</ref>
The SPI armor generally lacks an [[energy shielding]] system, making the user far more vulnerable to enemy fire. However, the Spartan-III [[Headhunters]] wore experimental armor that was equipped with energy shields due to their elite nature and value. However, power must be drawn from the energy shields to recharge the suit's active camouflage module.<ref name="head212">'''[[Halo: Evolutions - Essential Tales of the Halo Universe]]''', "[[Headhunters]]", ''page 212''</ref>


The baseline SPI armor can be easily destroyed from plasma based weaponry, armor piercing rounds and other threats. Overall the armor has inferior protection than [[Mjolnir armor]] . Forcing the user to rely heavily on its stealth technology and superior tactics.{{Citation needed}}
The baseline SPI armor can be easily destroyed from plasma based weaponry, armor piercing rounds and other threats. Overall the armor has inferior protection than [[Mjolnir armor]], forcing the user to rely heavily on its stealth technology and superior tactics.{{Citation needed}}


==Operational history==
==Operational history==
Although early versions of the SPI system were tested by [[Orbital Drop Shock Troopers]],<ref name="g164">'''Halo: Ghosts of Onyx''', ''page 164''</ref> the armor was most prominently issued to the [[Spartan-III]] supersoldiers.{{Ref/Reuse|goo14}} With over 2,000 units of SPI armor manufactured during the [[Human-Covenant War]],{{Ref/Reuse|HM}} the SPI armor had been mostly phased out of use by Spartan-IIIs by [[2558]] in favor of Mjolnir. However, SPI continues to fill a usage niche in covert roles, particularly within ONI; the Spartan-IIIs in [[Veta Lopis]]' [[Ferret]] team often used SPI instead of Mjolnir due to the former's superior stealth capabilities.<ref>''Halo: Retribution'', Chapter 18</ref><ref>[https://twitter.com/TDenningauthor/status/912699859924393984 '''Twitter''': ''Troy Denning status update #912699859924393984'']</ref> The SPI armor has also been issued to non-Spartan personnel, such as Veta Lopis, whose suit was custom-built to fit her small frame.<ref>[https://twitter.com/TDenningauthor/status/879779858393440256 '''Twitter''': ''Troy Denning status update #879779858393440256'']</ref> [[SPARTAN-G059]], deployed as an ONI assassin, used SPI as late as 2558.<ref>'''[[Halo: Tales from Slipspace]]''', ''[[Knight Takes Bishop]]''</ref> As well, the photoreactive plating technology has seen limited but successful use in several special operations ODST units.<ref>[https://www.halowaypoint.com/en-us/community/blog-posts/canon-fodder-fifty-caliber '''Halo Waypoint''' - ''Cannon Fodder: Fifty Caliber'']</ref>
Early versions of the Semi-Powered Infiltration armor were developed by [[ONI Section Three]] around the beginning of the [[Human-Covenant War]] for use by ONI agents. A facility dedicated to testing the armor was constructed underground at the future site of the [[Avery J. Johnson Academy of Military Science]].{{Ref/Game|HINF|Site Unseen}}
 
Although early versions of the SPI system were tested by [[Orbital Drop Shock Troopers]],<ref name="g164">'''Halo: Ghosts of Onyx''', ''page 164''</ref> the armor was most prominently issued to the [[Spartan-III]] supersoldiers.{{Ref/Reuse|goo14}} With over 2,000 units of SPI armor manufactured during the [[Human-Covenant War]],{{Ref/Reuse|HM}} the SPI armor had been mostly phased out of use by Spartan-IIIs by [[2558]] in favor of Mjolnir.{{Ref/Site|Id=CF50|URL=https://www.halowaypoint.com/en-us/news/canon-fodder-fifty-caliber|Site=Halo Waypoint|Page=Canon Fodder - Fifty Caliber|D=10|M=03|Y=2019}} However, SPI continues to fill a usage niche in covert roles, particularly within ONI; the Spartan-IIIs in [[Veta Lopis]]' [[Ferret]] team often used SPI instead of Mjolnir due to the former's superior stealth capabilities.<ref>''Halo: Retribution'', Chapter 18</ref><ref>[https://twitter.com/TDenningauthor/status/912699859924393984 '''Twitter''': ''Troy Denning status update #912699859924393984'']</ref> The SPI armor has also been issued to non-Spartan personnel, such as Veta Lopis, whose suit was custom-built to fit her small frame.<ref>[https://twitter.com/TDenningauthor/status/879779858393440256 '''Twitter''': ''Troy Denning status update #879779858393440256'']</ref> [[SPARTAN-G059]], deployed as an ONI assassin, used SPI as late as 2558.<ref>'''[[Halo: Tales from Slipspace]]''', ''[[Knight Takes Bishop]]''</ref> As well, the photoreactive plating technology has seen limited but successful use in several special operations ODST units.{{Ref/Reuse|CF50}}


== Versions ==
== Versions ==
=== Mark I ===
=== Mark I ===
The Mark I was the first, experimental iteration of the SPI system used by the Spartan-IIIs of [[SPARTAN-III Alpha Company|Alpha Company]]. The featured photoreactive panels gave the Spartans of Alpha Company a rough equivalent to active camouflage. The camouflage patterns, however, shifted irregularly and imperfectly, which made the photoreactive panels inferior compared to the [[Covenant]]'s active camouflage technologies.<ref>'''Halo: Ghosts of Onyx''', ''page 85''</ref>
The Mark I was an experimental iteration of the SPI system used by the Spartan-IIIs of [[SPARTAN-III Alpha Company|Alpha Company]]. The featured photoreactive panels gave the Spartans of Alpha Company a rough equivalent to active camouflage. The camouflage patterns, however, shifted irregularly and imperfectly, which made the photoreactive panels inferior compared to the [[Covenant]]'s active camouflage technologies.<ref>'''Halo: Ghosts of Onyx''', ''page 85''</ref>


=== Mark II ===
=== Mark II ===
The Mark II was an improvement of the SPI Mark I, first used by the drill instructors of [[SPARTAN-III Beta Company|Beta Company]], and then by the Spartans of Beta and Gamma Companies.<ref name="goo89">'''Halo: Ghosts of Onyx''', ''page 89''</ref> The armor sports new photoreactive coating to boost its camouflaging capabilities. Although the new photoreactive coating can mimic a wide range of electromagnetic radiation, it is still sensitive to overload, making the wearer vulnerable for several seconds after a [[flashbang]] or [[plasma]] shots from plasma weaponry or any directed energy weapon hit while the panels reset.<ref name="goo113">'''Halo: Ghosts of Onyx''', ''page 113''</ref>
The Mark II was an improvement of the SPI Mark I, first used by the drill instructors of [[SPARTAN-III Beta Company|Beta Company]], and then by the Spartans of Beta and Gamma Companies.<ref name="goo89">'''Halo: Ghosts of Onyx''', ''page 89''</ref> The armor sports new photoreactive coating to boost its camouflaging capabilities. Although the new photoreactive coating can mimic a wide range of electromagnetic radiation, it is still sensitive to overload, making the wearer vulnerable for several seconds after a [[flashbang]] or [[plasma]] shots from plasma weaponry or any directed energy weapon hit while the panels reset.<ref name="goo113">'''Halo: Ghosts of Onyx''', ''page 113''</ref> Originally, the suits were not watertight,<ref name="GoOCP">'''Halo: Ghosts of Onyx''', Chapter Prologue</ref> but by 2552 they had been upgraded to resist submersion with their own [[oxygen]] supply.<ref name="GoOC28">'''Halo: Ghosts of Onyx''', Chapter 28, page 251</ref>  


The armor was proposed by [[Kurt Ambrose]] in [[2537]] for Alpha Company, but the request was denied because the armor was over budget.<ref>'''Halo: Ghosts of Onyx''', ''page 80''</ref> After Alpha Company's Pyrrhic victory in [[Operation: PROMETHEUS]], the Mark II was approved for mass production. After the augmentation of [[SPARTAN-III Gamma Company|Gamma Company]], small adjustments were installed into the Mark II SPI armor,{{Ref/Reuse|goo99}} including experimental refits to the ballistic gel layers, upgraded software suites, and other functions, slated to be introduced to the systems prior to Gamma Company's deployment in [[2552]].<ref name="goo99">'''Halo: Ghosts of Onyx''', ''page 99''</ref> One major improvement is that the armor is now hermetically sealed and contains an internal [[oxygen]] supply for seven minutes.<ref name="g251">'''Halo: Ghosts of Onyx''', ''page 251''</ref>
The armor was proposed by [[Kurt Ambrose]] in [[2537]] for Alpha Company, but the request was denied because the armor was over budget.<ref>'''Halo: Ghosts of Onyx''', ''page 80''</ref> After Alpha Company's Pyrrhic victory in [[Operation: PROMETHEUS]], the Mark II was approved for mass production. After the augmentation of [[SPARTAN-III Gamma Company|Gamma Company]], small adjustments were installed into the Mark II SPI armor,{{Ref/Reuse|goo99}} including experimental refits to the ballistic gel layers, upgraded software suites, and other functions, slated to be introduced to the systems prior to Gamma Company's deployment in [[2552]].<ref name="goo99">'''Halo: Ghosts of Onyx''', ''page 99''</ref>


==Mainline armor components==
==Mainline armor components==
Line 37: Line 37:


;Techsuit: The bodysuit of the SPI system is composed of a layered mesh of ballistic liquid nanocrystal that is significantly more effective than traditional body armor materials such as Kevlar while being less bulky.{{Ref/Reuse|goo171}}{{Ref/Reuse|g114}}<ref>'''Halo: Ghosts of Onyx''', ''page 360''</ref> The techsuit's leggings<ref name="g141">'''Halo: Ghosts of Onyx''', ''page 141''</ref> and sleeves can be removed independently.<ref>'''Halo: Last Light''', ''page 125'' (Google Play edition)</ref>
;Techsuit: The bodysuit of the SPI system is composed of a layered mesh of ballistic liquid nanocrystal that is significantly more effective than traditional body armor materials such as Kevlar while being less bulky.{{Ref/Reuse|goo171}}{{Ref/Reuse|g114}}<ref>'''Halo: Ghosts of Onyx''', ''page 360''</ref> The techsuit's leggings<ref name="g141">'''Halo: Ghosts of Onyx''', ''page 141''</ref> and sleeves can be removed independently.<ref>'''Halo: Last Light''', ''page 125'' (Google Play edition)</ref>
Attacks from energy directed weapons will compromise the techsuit and the armor plating.


;Photoreactive panels: The outer shell of the SPI armor comprises a series of lightweight laminate plates with a photoreactive coating.{{Ref/Reuse|HM}} The photoreactive panels act as [[active camouflage]] when active,<ref>'''Halo: Ghosts of Onyx''', ''page 165''</ref> effectively blending the wearer with their environment.{{Ref/Reuse|goo14}} The coating also renders the wearer nearly invisible to infrared and passive light-gathering systems.<ref>'''Halo: Last Light''', ''page 95'' (Google Play edition)</ref> Since the photoreactive plates take time to recover after explosions such as a [[flashbang grenade]] and [[Plasma weaponry|plasma]] hits, the wearer is visible until the plates recover.{{Ref/Reuse|goo113}} With the exception of the [[Headhunters]]' suits, the SPI armor does not feature energy field-based active camouflage systems like those of the Covenant.{{Ref/Reuse|head212}} When inert, the plating is matte gray{{Ref/Reuse|mythos}}{{Ref/Reuse|g141}} or green, though some SPI suits have been known to use different colors such as red.<ref>'''Headhunters''' ''motion comic''</ref><ref>'''Halo Mythos''', ''page 135''</ref>
;Photoreactive panels: The outer shell of the SPI armor comprises a series of lightweight laminate plates with a photoreactive coating.{{Ref/Reuse|HM}} The photoreactive panels act as [[active camouflage]] when active,<ref>'''Halo: Ghosts of Onyx''', ''page 165''</ref> effectively blending the wearer with their environment.{{Ref/Reuse|goo14}} The coating also renders the wearer nearly invisible to infrared and passive light-gathering systems.<ref>'''Halo: Last Light''', ''page 95'' (Google Play edition)</ref> Since the photoreactive plates take time to recover after explosions such as a [[flashbang grenade]] and [[Plasma weaponry|plasma]] hits, the wearer is visible until the plates recover.{{Ref/Reuse|goo113}} With the exception of the [[Headhunters]]' suits, the SPI armor does not feature energy field-based active camouflage systems like those of the Covenant.{{Ref/Reuse|head212}} When inert, the plating is matte gray{{Ref/Reuse|mythos}}{{Ref/Reuse|g141}} or green, though some SPI suits have been known to use different colors such as red.<ref>'''Headhunters''' ''motion comic''</ref><ref>'''Halo Mythos''', ''page 135''</ref>
Line 45: Line 44:
;Tactile bracers: The bracer armor pieces around the boots grant slight improvements to speed and dexterity with negligible shielding reduction.{{Ref/Reuse|HM}}
;Tactile bracers: The bracer armor pieces around the boots grant slight improvements to speed and dexterity with negligible shielding reduction.{{Ref/Reuse|HM}}


;Environmental controls: The suit possesses rudimentary environmental regulation system to maintain a comfortable temperature for the wearer.<ref>'''Halo: Ghosts of Onyx''', ''page 22''</ref> However, the system is not designed for extended use and it will become increasingly uncomfortable to wear if used continuously over long periods of time.<ref>'''Halo: Ghosts of Onyx''', ''page 254''</ref> As of 2552, the Mark II SPI armor is also fully sealed and contains an internal oxygen supply for seven minites.{{Ref/Reuse|g251}} The armor also has an efficient cooling system and is significantly difficult to detect even with thermal scanners.{{Ref/Reuse|goo89}}
;Environmental controls: The suit possesses rudimentary environmental regulation system to maintain a comfortable temperature for the wearer.<ref>'''Halo: Ghosts of Onyx''', ''page 22''</ref> However, the system is not designed for extended use and it will become increasingly uncomfortable to wear if used continuously over long periods of time.<ref>'''Halo: Ghosts of Onyx''', ''page 254''</ref> The armor also has an efficient cooling system and is significantly difficult to detect even with thermal scanners.{{Ref/Reuse|goo89}}


;Biofoam injection ports: Like MJOLNIR, the SPI armor has dedicated ports allowing the quick injection of [[biofoam]] or other battlefield pharmaceuticals.<ref>'''Halo: Ghosts of Onyx''', ''page 362''</ref>
;Biofoam injection ports: Like MJOLNIR, the SPI armor has dedicated ports allowing the quick injection of [[biofoam]] or other battlefield pharmaceuticals.<ref>'''Halo: Ghosts of Onyx''', ''page 362''</ref>
Line 52: Line 51:


;Power cell: The armor is powered by a low-profile, shielded [[BA-55901/PLMD]] battery cell.{{Ref/Reuse|mythos}}
;Power cell: The armor is powered by a low-profile, shielded [[BA-55901/PLMD]] battery cell.{{Ref/Reuse|mythos}}
;Combat knife: The armor is issued with a standart issue combat knife. It is made from hyperdense strong alloys. Strong enough to withstand the brute force of a Spartan-III operator.
The operator is strong enough to pierce through energy shielding and thick armor.


==Variants==
==Variants==
Line 60: Line 56:


===Air Assault-like===
===Air Assault-like===
This variant has a [[STALKER-class Mjolnir|Stalker]]-like suit, with a helmet that is similar in design to [[AIR ASSAULT-class Mjolnir|Air Assault]]. It was utilized by [[Roland-B210]]. It was equipped with Motion trackers, energy shielding, VISR technology and a prototype active camouflage.
This variant has a [[STALKER-class Mjolnir|Stalker]]-like suit, with a helmet that is similar in design to [[AIR ASSAULT-class Mjolnir|Air Assault]]. It was utilized by [[Roland-B210]] and equipped with motion trackers, energy shielding, VISR, and a prototype active camouflage.
<gallery>
<gallery>
File:Roland SPI 2.png|Air Assault-like.
File:Roland SPI 2.png|Air Assault-like.
Line 75: Line 71:
<gallery>
<gallery>
File:Marksniper.png|Grenadier-like.
File:Marksniper.png|Grenadier-like.
File:Enc22 MarkG313.jpg|The suit.
</gallery>
</gallery>


Line 83: Line 80:
File:HTMCC Mirage Armour.jpg|MIRAGE-class Mjolnir
File:HTMCC Mirage Armour.jpg|MIRAGE-class Mjolnir
</gallery>
</gallery>
==Non-canon and dubious canon appearances==
[[File:HTVS2 - KaiWithSPIRegiment.png|thumb|right|250px|SPI-clad SPARTAN-IIIs in front of [[Kai-125/Silver|Kai-125]].]]
===Silver Timeline===
{{Notice/Silver|category=no}}
{{Quote|Nice suit.|[[John-117/Silver|John-117]] commenting on [[Talia Perez]]'s SPI armor.{{Ref/Film|Id=Thermopylae|TV|Episode=[[Thermopylae (TV Series)|Thermopylae]]}}}}
{{Expand-section}}
{{Clear}}


==Production note==
==Production note==
Line 90: Line 95:
== Gallery ==
== Gallery ==
<gallery>
<gallery>
File:SpartanIII.jpg|A Spartan wearing SPI armor.
File:HGOO Kurt Crop.jpg|Kurt-051 wearing SPI armor in ''[[Halo: Ghosts of Onyx]]''.
File:Semi-Powered Infiltration.png|A conceptual illustration of the SPI armor.
File:Semi-Powered Infiltration.png|A conceptual illustration of the SPI armor.
File:H3 Guardian Mirage AR.png|A [[Spartan-II]] clad in [[MIRAGE-class Mjolnir]] in the ''[[Halo 3]]'' portion of ''[[Halo: The Master Chief Collection]]''.
File:H3 Guardian Mirage AR.png|A [[Spartan-II]] clad in [[MIRAGE-class Mjolnir]] in the ''[[Halo 3]]'' portion of ''[[Halo: The Master Chief Collection]]''.
File:Headhunters.png|Two Headhunters, [[Roland-B210]] and [[Jonah-B283]], wearing SPI armor. The former is wearing an unknown variant.
File:Headhunters.png|Two Headhunters, [[Roland-B210]] and [[Jonah-B283]], wearing SPI armor in ''[[Headhunters (story)|Headhunters]]''.  
File:Spivariant.jpg|Another view of Roland's and Jonah's SPI armor.
File:Spivariant.jpg|Another view of Roland's and Jonah's SPI armor.
File:HEvol - SPI HUD.png|An energy shielded SPI suit's [[Heads-up display|HUD]]. Note the HUD's resemblance to that of the [[MJOLNIR Powered Assault Armor/Mark V|MJOLNIR Mark V]].
File:HEvol - SPI HUD.png|An energy shielded SPI suit's [[Heads-up display|HUD]]. Note the HUD's resemblance to that of the [[MJOLNIR Powered Assault Armor/Mark V|MJOLNIR Mark V]].
Line 99: Line 104:
File:Headhunters - Jonah profile.png|Renders of Jonah's SPI armor.
File:Headhunters - Jonah profile.png|Renders of Jonah's SPI armor.
File:Evo Headhunters Post.jpg|Officially endorsed fan art of Jonah and Roland wearing modified SPI armor.
File:Evo Headhunters Post.jpg|Officially endorsed fan art of Jonah and Roland wearing modified SPI armor.
File:HLL cover-Olivia full.png|[[Olivia-G291]] in SPI armor with her helmet removed.
File:HLL cover-Olivia full.png|[[Olivia-G291]] in SPI armor with her helmet removed in ''[[Halo: Last Light]]''.
File:HM-SIIIs.png|MIRAGE-class helmet with an eagle emblem on the visor.
File:HM-SIIIs.png|MIRAGE-class helmet with an eagle emblem on the visor in ''[[Halo Mythos]]''.
File:HM EVA-like SPI.png|EVA-like helmet stylized SPI.  
File:HM EVA-like SPI.png|EVA-like helmet stylized SPI.  
File:TfS - SPARTAN-G059.png|[[SPARTAN-G059]] clad in SPI armor.
File:TfS - SPARTAN-G059.png|[[SPARTAN-G059]] clad in SPI armor in ''[[Knight Takes Bishop]]''.
File:Veta SPI.png|[[Veta Lopis]] equipped with SPI armor.
File:Veta SPI.png|[[Veta Lopis]] equipped with SPI armor in ''[[Halo: Retribution]]''.
File:HINF Mirage IIC Core Icon.png|The Mirage IIC core in ''[[Halo Infinite]]''.
File:Enc22 Kurt with helmet.jpg|Image of Kurt Ambrose clad in SPI from the ''[[Halo Encyclopedia (2022 edition)|Halo Encyclopedia]]''.
File:Enc22 SPI.png|An image of SPI armor in the ''Halo Encyclopedia''.
File:HTVS2-SpartansinSPI.jpg|SPI-clad Spartan-IIIs in ''[[Halo: The Television Series Season Two]]''.
</gallery>
</gallery>


Line 120: Line 129:
*''[[Halo: Official Spartan Field Manual]]''
*''[[Halo: Official Spartan Field Manual]]''
*''[[Halo: Divine Wind]]'' {{Mo}}
*''[[Halo: Divine Wind]]'' {{Mo}}
*''[[Halo Infinite]]''
**''[[Season 03: Echoes Within]]''
*''[[Halo: The Television Series Season Two]]''
**''[[Aleria (TV Series)|Aleria]]''
**''[[Onyx (TV Series)|Onyx]]''
**''[[Thermopylae (TV Series)|Thermopylae]]''
**''[[Halo (TV Series)|Halo]]''


==Notes==
==Notes==

Latest revision as of 18:38, August 26, 2024

Semi-Powered Infiltration armor
HM-SPI-schematic.jpg
Production overview

Manufacturer(s):

Watershed Division[1]

Testing site(s):

Currahee Special Assembly Plant 2[1]

Role(s):

Stealth/assault

 

The Semi-Powered Infiltration armor (SPI armor) is a United Nations Space Command combat armor system designed with an emphasis on stealth through the use of special photoreactive panels.[2] The armor was developed by the Watershed Division, with Ruk Ariaustin as design lead.[1]

Overview[edit]

Described as "part legionnaire mail, part tactical body armor, and part chameleon", the SPI armor features photoreactive panels that mimic the surrounding textures, effectively being the UNSC equivalent to the Covenant's active camouflage systems.[3] The SPI armor features a full body armor with an enclosed helmet and heads-up display. The undersuit is equipped with a cushioning layer of liquid nanocrystal that provides more ballistic protection than three centimeters of Kevlar diamond weave, without the bulk.[4] The hardened armor plates, though advanced compared to standard UNSC infantry armor, can take only a few glancing blows before failing.[2]

Though more advanced than the Orbital Drop Shock Troopers' body armor, the SPI armor is less powerful than the MJOLNIR Powered Assault Armor originally issued to the SPARTAN-IIs.[5] Its main benefit is that it is drastically cheaper to produce than Mjolnir.[6] The cost reduction meant that dozens to hundreds of suits of SPI could be produced for the cost of a single suit of Mark IV.[7] Although the SPI suit provides modest enhancements to the wearer's strength and mobility,[1] this amplification is not as drastic as that afforded by the Mjolnir.[8] Consequently, the SPI armor can be worn by any individual and does not require special neurological, skeletal or muscular augmentation; for example, the unaugmented instructors for the Spartan-IIIs often wore SPI armor.[9][10] The SPI armor is not as bulky or as heavy as the Mjolnir armor,[11] although the plating material is also less durable: Kelly-087 dented a Spartan-III's chest plate with her fist when first encountering the Spartan-IIIs.[12]

The SPI armor generally lacks an energy shielding system, making the user far more vulnerable to enemy fire. However, the Spartan-III Headhunters wore experimental armor that was equipped with energy shields due to their elite nature and value. However, power must be drawn from the energy shields to recharge the suit's active camouflage module.[13]

The baseline SPI armor can be easily destroyed from plasma based weaponry, armor piercing rounds and other threats. Overall the armor has inferior protection than Mjolnir armor, forcing the user to rely heavily on its stealth technology and superior tactics.[citation needed]

Operational history[edit]

Early versions of the Semi-Powered Infiltration armor were developed by ONI Section Three around the beginning of the Human-Covenant War for use by ONI agents. A facility dedicated to testing the armor was constructed underground at the future site of the Avery J. Johnson Academy of Military Science.[14]

Although early versions of the SPI system were tested by Orbital Drop Shock Troopers,[10] the armor was most prominently issued to the Spartan-III supersoldiers.[2] With over 2,000 units of SPI armor manufactured during the Human-Covenant War,[1] the SPI armor had been mostly phased out of use by Spartan-IIIs by 2558 in favor of Mjolnir.[15] However, SPI continues to fill a usage niche in covert roles, particularly within ONI; the Spartan-IIIs in Veta Lopis' Ferret team often used SPI instead of Mjolnir due to the former's superior stealth capabilities.[16][17] The SPI armor has also been issued to non-Spartan personnel, such as Veta Lopis, whose suit was custom-built to fit her small frame.[18] SPARTAN-G059, deployed as an ONI assassin, used SPI as late as 2558.[19] As well, the photoreactive plating technology has seen limited but successful use in several special operations ODST units.[15]

Versions[edit]

Mark I[edit]

The Mark I was an experimental iteration of the SPI system used by the Spartan-IIIs of Alpha Company. The featured photoreactive panels gave the Spartans of Alpha Company a rough equivalent to active camouflage. The camouflage patterns, however, shifted irregularly and imperfectly, which made the photoreactive panels inferior compared to the Covenant's active camouflage technologies.[20]

Mark II[edit]

The Mark II was an improvement of the SPI Mark I, first used by the drill instructors of Beta Company, and then by the Spartans of Beta and Gamma Companies.[21] The armor sports new photoreactive coating to boost its camouflaging capabilities. Although the new photoreactive coating can mimic a wide range of electromagnetic radiation, it is still sensitive to overload, making the wearer vulnerable for several seconds after a flashbang or plasma shots from plasma weaponry or any directed energy weapon hit while the panels reset.[22] Originally, the suits were not watertight,[23] but by 2552 they had been upgraded to resist submersion with their own oxygen supply.[24]

The armor was proposed by Kurt Ambrose in 2537 for Alpha Company, but the request was denied because the armor was over budget.[25] After Alpha Company's Pyrrhic victory in Operation: PROMETHEUS, the Mark II was approved for mass production. After the augmentation of Gamma Company, small adjustments were installed into the Mark II SPI armor,[26] including experimental refits to the ballistic gel layers, upgraded software suites, and other functions, slated to be introduced to the systems prior to Gamma Company's deployment in 2552.[26]

Mainline armor components[edit]

MIRAGE-class helmet[27]
The standard headgear of the SPI armor, the MIRAGE-class helmet features a large, bulbous faceplate somewhat similar to that of the Mjolnir EVA variant. The visor is normally gold-mirrored in color[28] and can be depolarized.[12] The helmet supports a heads-up display with features similar to that of the MJOLNIR system, including TACMAP, TEAMBIO, and TEAMCOM interfaces; a motion tracker;[29] as well as team status lights.[30][31] The visor suite features an automatic magnification and image enhancement system controlled by the wearer's eye movements. For example, if the wearer squints while looking at a particular spot the system will automatically zoom in.[32] Both the image enhancement and the visor's internal polarization can also be controlled manually.[33][34] The helmet possesses tactical lights[35] and a defogging vent to remove internal moisture.[36]
Techsuit
The bodysuit of the SPI system is composed of a layered mesh of ballistic liquid nanocrystal that is significantly more effective than traditional body armor materials such as Kevlar while being less bulky.[4][31][37] The techsuit's leggings[38] and sleeves can be removed independently.[39]
Photoreactive panels
The outer shell of the SPI armor comprises a series of lightweight laminate plates with a photoreactive coating.[1] The photoreactive panels act as active camouflage when active,[40] effectively blending the wearer with their environment.[2] The coating also renders the wearer nearly invisible to infrared and passive light-gathering systems.[41] Since the photoreactive plates take time to recover after explosions such as a flashbang grenade and plasma hits, the wearer is visible until the plates recover.[22] With the exception of the Headhunters' suits, the SPI armor does not feature energy field-based active camouflage systems like those of the Covenant.[13] When inert, the plating is matte gray[27][38] or green, though some SPI suits have been known to use different colors such as red.[42][43]
Rift-class gauntlets
The SPI suit is equipped with shock-resistant and force-amplifying Rift-class gauntlets.[1]
Tactile bracers
The bracer armor pieces around the boots grant slight improvements to speed and dexterity with negligible shielding reduction.[1]
Environmental controls
The suit possesses rudimentary environmental regulation system to maintain a comfortable temperature for the wearer.[44] However, the system is not designed for extended use and it will become increasingly uncomfortable to wear if used continuously over long periods of time.[45] The armor also has an efficient cooling system and is significantly difficult to detect even with thermal scanners.[21]
Biofoam injection ports
Like MJOLNIR, the SPI armor has dedicated ports allowing the quick injection of biofoam or other battlefield pharmaceuticals.[46]
Data socket
The SPI armor's gauntlet features a data port to which small electronic devices such as data pads can be connected.[47][48]
Power cell
The armor is powered by a low-profile, shielded BA-55901/PLMD battery cell.[27]

Variants[edit]

In addition to the standard model, several variants of the SPI armor exist.[Note 1]

Air Assault-like[edit]

This variant has a Stalker-like suit, with a helmet that is similar in design to Air Assault. It was utilized by Roland-B210 and equipped with motion trackers, energy shielding, VISR, and a prototype active camouflage.

  • Air Assault-like.

    Air Assault-like.

Pilot-like[edit]

This variant has a helmet design that is similar to Pilot. A Spartan-III wearing this variant was stuck in Onyx between 2552 and 2553.

  • Pilot-like helmet.

    Pilot-like helmet.

Grenadier-like[edit]

This variant has a helmet design that is similar to Grenadier. Mark-G313 wore this suit during Operation: JOVIAN WHISTLE.[Note 2]

  • Grenadier-like.

    Grenadier-like.

  • The suit.

    The suit.

Mirage[edit]

Main article: MIRAGE-class Mjolnir

This variant is a modified SPI armor and compatible with the MJOLNIR Powered Assault Armor Mark VI. It incorporates the latest in software-definable deception jammers, and the forearms are a further refinement of the RIFT-class force-amplification gauntlets found on the standard SPI armor.

  • MIRAGE-class Mjolnir

    MIRAGE-class Mjolnir

Non-canon and dubious canon appearances[edit]

Kai-125 with Semi-Powered Infiltration armor-clad soldiers.
SPI-clad SPARTAN-IIIs in front of Kai-125.

Silver Timeline[edit]

HTV-SilverTeam logo.png
 This article contains information about the Silver Timeline, and is not a part of the established Halo canon.

"Nice suit."
— John-117 commenting on Talia Perez's SPI armor.[49]
Help.png This section needs expansion. You can help Halopedia by expanding it.

Production note[edit]

Main-Superintendent.png Browse more images in this article's gallery page.

The SPI armor is referred to as "PR" twice in Halo: Ghosts of Onyx.[50][51] No context or explanation is provided for this alternate designation, although it is possible that the suit was known as "PR" (possibly an acronym for "PhotoReactive") in an earlier revision of the novel's manuscript and that the presence of the two mentions in the final book is an editing oversight.

Gallery[edit]

List of appearances[edit]

Notes[edit]

  1. ^ Similar to the somewhat differing depictions of Mjolnir armor, the exact design details of the "default" SPI armor vary between different sources of Halo canon, sometimes within a single source. Since it is difficult to determine which of these examples constitute officially-defined variants of the suit rather than artistic license, only the versions that overtly deviate from the standard pattern are listed below, while the gallery section provides examples of less pronounced variety between SPI suits.
  2. ^ In the cover of Halo: Last Light, Mark (who is seen in the background of the image) is depicted as wearing a standard set of SPI armor.

Sources[edit]

  1. ^ a b c d e f g h Halo Mythos, pages 76-77
  2. ^ a b c d Halo: Ghosts of Onyx, page 14
  3. ^ Halo: Ghosts of Onyx, page 16
  4. ^ a b Halo: Ghosts of Onyx, page 171
  5. ^ Halo: Glasslands, page 207
  6. ^ Halo: Ghosts of Onyx, page 46
  7. ^ Halo Waypoint, Canon Fodder - Anniversary Armory (Retrieved on Feb 24, 2024) [archive]
  8. ^ Halo: Last Light, page 33 (Google Play edition)
  9. ^ Halo: Ghosts of Onyx, pages 89, 94
  10. ^ a b Halo: Ghosts of Onyx, page 164
  11. ^ Halo: Glasslands, page 40
  12. ^ a b Halo: Ghosts of Onyx, pages 168-169
  13. ^ a b Halo: Evolutions - Essential Tales of the Halo Universe, "Headhunters", page 212
  14. ^ Halo Infinite, Site Unseen
  15. ^ a b Halo Waypoint, Canon Fodder - Fifty Caliber (Retrieved on Mar 10, 2019) [archive]
  16. ^ Halo: Retribution, Chapter 18
  17. ^ Twitter: Troy Denning status update #912699859924393984
  18. ^ Twitter: Troy Denning status update #879779858393440256
  19. ^ Halo: Tales from Slipspace, Knight Takes Bishop
  20. ^ Halo: Ghosts of Onyx, page 85
  21. ^ a b Halo: Ghosts of Onyx, page 89
  22. ^ a b Halo: Ghosts of Onyx, page 113
  23. ^ Halo: Ghosts of Onyx, Chapter Prologue
  24. ^ Halo: Ghosts of Onyx, Chapter 28, page 251
  25. ^ Halo: Ghosts of Onyx, page 80
  26. ^ a b Halo: Ghosts of Onyx, page 99
  27. ^ a b c Halo Mythos, page 77
  28. ^ Halo: Ghosts of Onyx, page 115
  29. ^ Halo: Last Light, page 146 (Google Play edition)
  30. ^ Halo: Ghosts of Onyx, pages 17, 22
  31. ^ a b Halo: Ghosts of Onyx, page 114
  32. ^ Halo: Ghosts of Onyx, page 19
  33. ^ Halo: Ghosts of Onyx, page 268
  34. ^ Halo: Ghosts of Onyx, page 345
  35. ^ Halo: Ghosts of Onyx, page 273
  36. ^ Halo: Ghosts of Onyx, page 316
  37. ^ Halo: Ghosts of Onyx, page 360
  38. ^ a b Halo: Ghosts of Onyx, page 141
  39. ^ Halo: Last Light, page 125 (Google Play edition)
  40. ^ Halo: Ghosts of Onyx, page 165
  41. ^ Halo: Last Light, page 95 (Google Play edition)
  42. ^ Headhunters motion comic
  43. ^ Halo Mythos, page 135
  44. ^ Halo: Ghosts of Onyx, page 22
  45. ^ Halo: Ghosts of Onyx, page 254
  46. ^ Halo: Ghosts of Onyx, page 362
  47. ^ Halo: Ghosts of Onyx, page 310
  48. ^ Halo: Ghosts of Onyx, page 356
  49. ^ Halo: The Television Series, episode Thermopylae
  50. ^ Halo: Ghosts of Onyx, page 87 ("...the flaws in their Mark-I PR suits...")
  51. ^ Halo: Ghosts of Onyx, page 141 ("...and pulled on the PR leggings.")

v • d • e
 
List of armor by faction

v • d • e
 
Human
Standard-issue
Powered exoskeleton
Configurations and accessories
For a complete list, check out our armor category.
Retrieved from "https://www.halopedia.org/index.php?title=Semi-Powered_Infiltration_armor&oldid=1642444"