Plasma weaponry

This article does not meet the wiki's general standards and/or standards on layouts. You can help by cleaning this article.

Plasma Weaponry refers to Directed Energy Weaponry that uses Plasma. The Covenant employ always follows a distinct pattern regardless of the specific gun; it is stabilized using magnetic fields. Without the field, the plasma dissipates too quickly to be of any real use. The field controls and contains the plasma, without interfering with firing. The plasma sword is an example of this technology, as the magnetic field holds the blade together while allowing it to cut through objects. This is also how the plasma pistol's overcharge shot works. A small magnetic generator is installed in the hilt of the pistol and, when fired, the bolt tracks its target using a very simple motion tracking system built into the magnetic generator which alters the field to make the plasma move. A larger version of this effect is seen in the plasma torpedoes of Covenant cruisers.

This information was obtained by Cortana, a UNSC AI, while she was in direct contact with a Covenant ship's data core.

Artificial Plasma Generation

To completely describe the state of a plasma, we would need to write down all the particle locations and velocities and describe the electromagnetic field in the plasma region. However, it is generally not practical or necessary to keep track of all the particles in a plasma. Therefore, plasma physicists commonly use less detailed descriptions, of which there are two main types:

Fluid model

Fluid models describe plasmas in terms of smoothed quantities, like density and averaged velocity around each position (see Plasma parameters). One simple fluid model, magnetohydrodynamics, treats the plasma as a single fluid governed by a combination of Maxwell's equations and the Navier–Stokes equations. A more general description is the two-fluid plasma picture, where the ions and electrons are described separately. Fluid models are often accurate when collisionality is sufficiently high to keep the plasma velocity distribution close to a Maxwell–Boltzmann distribution. Because fluid models usually describe the plasma in terms of a single flow at a certain temperature at each spatial location, they can neither capture velocity space structures like beams or double layers, nor resolve wave-particle effects.

Kinetic model

Kinetic models describe the particle velocity distribution function at each point in the plasma and therefore do not need to assume a Maxwell–Boltzmann distribution. A kinetic description is often necessary for collisionless plasmas. There are two common approaches to kinetic description of a plasma. One is based on representing the smoothed distribution function on a grid in velocity and position. The other, known as the particle-in-cell (PIC) technique, includes kinetic information by following the trajectories of a large number of individual particles. Kinetic models are generally more computationally intensive than fluid models. The Vlasov equation may be used to describe the dynamics of a system of charged particles interacting with an electromagnetic field. In magnetized plasmas, a gyrokinetic approach can substantially reduce the computational expense of a fully kinetic simulation.

Most artificial plasmas are generated by the application of electric and/or magnetic fields. Plasma generated in a laboratory setting and for industrial use can be generally categorized by:

• The type of power source used to generate the plasma; DC, RF and microwave.
• The pressure at which they operate; vacuum pressure (< 10 mTorr or 1 Pa), moderate pressure (~ 1 Torr or 100 Pa), atmospheric pressure (760 Torr or 100 kPa).
• The degree of ionization within the plasma; fully ionized, partially ionized, weakly ionized.
• The temperature relationships within the plasma: thermal plasma (T_e = T_ion = T_gas), non-thermal or "cold" plasma (T_e >> T_ion = T_gas)
• The electrode configuration used to generate the plasma.
• The magnetization of the particles within the plasma; Magnetized (both ion and electrons are trapped in Larmor orbits by the magnetic field), partially magnetized (the electrons but not the ions are trapped by the magnetic field), non-magnetized (the magnetic field is too weak to trap the particles in orbits but may generate Lorentz forces).
• Its application

Low-pressure discharges

• Glow discharge plasmas: non-thermal plasmas generated by the application of DC or low frequency RF (<100 kHz) electric field to the gap between two metal electrodes. Probably the most common plasma; this is the type of plasma generated within fluorescent light tubes.
• Capacitively coupled plasma (CCP): similar to glow discharge plasmas, but generated with high frequency RF electric fields, typically 13.56 MHz. These differ from glow discharges in that the sheaths are much less intense. These are widely used in the microfabrication and integrated circuit manufacturing industries for plasma etching and plasma enhanced chemical vapor deposition.
• Inductively coupled plasma (ICP): similar to a CCP and with similar applications but the electrode consists of a coil wrapped around the discharge volume which inductively excites the plasma.
• Wave heated plasma: similar to CCP and ICP in that it is typically RF (or microwave), but is heated by both electrostatic and electromagnetic means. Examples are helicon discharge, electron cyclotron resonance (ECR), and ion cyclotron resonance (ICR). These typically require a coaxial magnetic field for wave propagation.

Atmospheric pressure

• Arc discharge: this is a high power thermal discharge of very high temperature (~10,000 K). It can be generated using various power supplies. It is commonly used in metallurgical processes. For example, it is used to melt rocks containing Al₂O₃ to produce aluminium.
• Corona discharge: this is a non-thermal discharge generated by the application of high voltage to sharp electrode tips. It is commonly used in ozone generators and particle precipitators.
• Dielectric barrier discharge (DBD): this is a non-thermal discharge generated by the application of high voltages across small gaps wherein a non-conducting coating prevents the transition of the plasma discharge into an arc. It is often mislabeled 'Corona' discharge in industry and has similar application to corona discharges. It is also widely used in the web treatment of fabrics. The application of the discharge to synthetic fabrics and plastics functionalizes the surface and allows for paints, glues and similar materials to adhere.
• Capacitive discharge: this is a nonthermal plasma generated by the application of RF power (e.g., 13.56 MHz) to one powered electrode, with a grounded electrode held at a small separation distance on the order of 1 cm. Such discharges are commonly stabilized using a noble gas such as helium or argon

Starship Weaponry

• Plasma Torpedo
• Plasma Turret
• Plasma Charge

Ground Weaponry

Mounted Weapons

• Anti-Aircraft Battery
• Plasma Beam
• Plasma Mortar
• Twin Plasma Cannons
• Type-26 Anti-Infantry Stationary Gun
• Type-42 Directed Energy Support Weapon
• Type-52 Directed Energy Support Weapon
• Prototype UNSC plasma artillery on the M-145D Rhino

Handheld Weapons

• Type-1 Energy Weapon/Sword
• Type-25 Directed Energy Pistol
• Type-25 Directed Energy Rifle
• Type-25 Directed Energy Rifle/Jiralhanae Variant
• Type-51 Directed Energy Rifle/Improved
• Type-52 Guided Munitions Launcher/Explosive

Explosives

• Plasma Grenade