Editing Panoramic camera mode

{{Status|Gameplay}}
'''Panoramic camera mode''', commonly shortened to '''Pan Cam''', is a feature that [[Bungie]] and [[343 Industries]] added to ''[[Halo 3]]'', ''[[Halo 3: ODST]]'', ''[[Halo: Reach]]'', ''[[Halo 4]]'', and ''[[Halo: The Master Chief Collection]]''. It is used by many players as a way to force the camera out of any map while in the [[Theater]], and its use is permitted for screenshots, Film Clips, and other files.

==Show coordinates/camera mode==
The Show Coordinates mode displays the exact location of the camera, its rotation (in degrees), its speed, and the current camera mode. Pan Cam itself cannot be enabled until coordinates are displayed.

===Instructions===
#Start a [[Custom Game]] or [[Campaign]] session with your network mode set to "System Link" or "My Xbox 360."
#Reset your button layout to the default.
#Press and hold the proper button combination for your game to show camera coordinates on-screen.
#*Halo 3 and Halo 3: ODST: '''LB + RB + LS + A + D-Pad UP'''.
#*Halo: Reach: '''B + X + RS + D-Pad UP'''.
#*Halo 4: '''A + B + X + D-Pad UP'''.

===Reading the coordinates===
Coordinates are displayed in white, sans-serif font, aligned to in the upper-left corner of the screen. The coordinates consist of three space-separated numbers, followed by a slash, followed by two more space-separated numbers, another slash, another number, and then either "[normal]" or "[pan-cam]". Here is an example of coordinates that may be shown: 

:212.377 159.564 137.233 / 91 -1.74 / 1.000 [normal]

The first three numbers are coordinates showing the camera's exact position in the map, relative to the map's centerpoint. The first two coordinates are the camera's lateral position; the third coordinate is the vertical position. You can never go farther than ±50000.000 world units from any map's center, though no map's playable area ever comes close to that size.

The next two numbers show the camera's angle of rotation in degrees. The first value shows your lateral orientation—if it's 0, you're looking east; if it's 90, you're looking north. The second value is your vertical orientation—if it's 0 or 180, the camera is level; if it's 90, the camera is looking straight up; and if it's -90 or 270, the camera is looking straight down.

The third number is the camera's speed, which can only be adjusted while in Pan Cam mode. Following that is the current camera mode.

===Uses for coordinates===
Coordinates can be useful when taking aerial photos of a map, to identify which way is north. They can be used to measure distances, as one world unit equals to ten feet. By taking note of the coordinates of an area in a [[Campaign]] level's cutscenes, it is also possible to "break into" the areas in the cutscenes when using the Pan Cam to glitch the camera outside the level boundaries (as described below). All cutscenes are rendered in real time, so all areas shown in cutscenes have to be hidden somewhere in a level. As an example, the coordinates above are where you can find the [[Ark]] as seen from space in the opening cutscene of the [[The Ark (level)|level of the same name]] -- it's hidden beneath the level boundaries. Near the start of that same level, you can also find [[Secret Room On The Ark|the ''Shadow of Intent'''s bridge, hidden behind a cliff face]].

==Pan Cam==
Pan Cam is little more than a set of alternate controls. These alternate controls, however, provide a previously-hidden function—the ability to change the camera's movement speed—that can be used to force the camera outside a level's boundaries.

To activate Pan Cam, first turn on Coordinates as described above. Then, press and hold '''LB + RB + LS + RS + D-Pad LEFT'''. The "[normal]" at the end of the coordinates should change to read, "[pan-cam]". You can also enable Pan Cam by simply viewing any Film Clip that was saved while in Pan Cam. Pan Cam will remain enabled either until you disable it or until your session ends (you exit or turn off the game).

The controls in Pan Cam are somewhat altered. The bumpers on the controller are now useless; '''LT''' is used to descend and '''RT''' is used to ascend. The left stick still controls your movement, but it cannot be used to move vertically, even if you are looking upward or downward. Up and Down on the D-Pad will increase and decrease your speed. Pausing is still Available using the A button.

==Glitching the Pan Cam outside a level's boundaries==
Pan Cam's main use is its is primarily used to force the camera out of a level's boundaries.

To do this, you must watch a Film in which a player either falls to their death or dies while in Edit Mode. Focus the camera on that player, and then pause the Film and detach the camera when the player dies. Then, approach, but not touch, the "target" boundary. Raise the camera's speed to a very high value (something around 50,000.000 will work), and either quickly flick the left stick towards the boundary (if it's a wall) or quickly press the appropriate trigger (if it's an invisible floor or ceiling). The result will be that you [[wikipedia:Physics engine#Game engines|clip]] through the wall and over to the other side.

(If the camera is following a living player, then it will snap back to that player after any attempt to exit the level's boundaries.)

To ensure that you've paused at the right time, "detach" the camera from the player by pressing '''Y''', move the camera away a small distance, and then press '''Y''' again; if the HUD appears, but the camera does not move, then you are now free to force the camera outside the map. Note, though, that sometimes, '''Y''' ''will'' return the camera to your character, but the camera can still be forced out of the map.

Make sure you reduce your speed after exiting the map, to make it easier to explore outside the map!

===Things to note===
There are a number of caveats and issues when working outside the level boundaries.
*Saving a Film Clip while outside the level boundaries can be problematic. In particular, the entire camera will become almost irreversibly glitched if you touch the boundaries from the outside.
**In rarer cases, this can happen when approaching the edge of a skybox—for example, the rather massive one surrounding [[Epitaph]]. It can be reversed by quickly backing away from the skybox before you move too far.
*If, while trying to clip past a boundary, you set the speed to too high of a value, you may become lost outside the level, unable to even see it. The on-screen coordinates can be used to navigate back to the level.
*Draw distance limits can render some or all of the level invisible when flying far outside the boundaries.
*The "[[Halo 3 Engine#Hall of mirrors effect|hall of mirrors effect]]" can be disorienting. In some 3D engines, when part of a screen is "empty" -- when ''nothing'', not even a skybox, is rendered on part of a screen—the contents of the previous frame show through on that screen, creating a "hall of mirrors" or "afterimage" effect. In ''Halo 3'', random red and blue patterns can also appear in such spaces. When taking a screenshot, a solid color (usually sky blue) fills such spaces.
*In Halo 3: ODST, the maximum speed is limited to 10000.00, but it is enough to break all the way out of the level if you struggle enough. In Halo 4, the maximum speed is 100.00, but some boundaries can be bypassed even at that low speed.

===Basic instructions for multiplayer maps===
[[File:Valhalla.jpg|thumb|250px|[[Valhalla]] viewed with the Pan Cam.]]
#Enable Coordinates, and then Pan Cam.
#Next, go to [[Forge]] on local play, and select any map. Find a simple way to kill yourself. One quick and easy way is to lower Editing Players' damage resistance to 10% and disable their shields. Then, in-game, just toss a grenade without even bothering to place Fusion Coils, and then enter Edit Mode right before it detonates.
#End the game, and go straight to Theater. Watch your character until it dies. As soon as your [[Monitor]] explodes, pause the Film. Then press '''Y''' to "detach" the camera from them. Now, you're free!

===Instructions for campaign maps===
#Enable Coordinates and Pan Cam.
#Find an easy way to kill yourself that will get your body near a level boundary and to a kill barrier; falling off a cliff works well.
#Head to Theater. Watch the Film, and wait until your body dies or leaves the map, e.g. falls through or hits the ground falls off or out of the map.
#Pause, and press '''Y''' to detach the camera from your character.
#Enjoy exploring the levels!

''Note'': Not all levels can be used for Pan Cam.{{citation needed}}

== Trivia ==
*Pan Cam can be used as a way to find certain [[Easter eggs]] and oddities that Bungie placed around the Multiplayer maps, such as [[Easter egg Towers|those seen in Sandtrap and Sandbox]].
*If you watch a [[Film Clip]] that has the Pan Camera enabled, then the Pan Cam will automatically enable itself for the remainder of the session.

[[Category:Tricks and cheats]]